الوصف

HQH***5 Shot Blasting Cleaning Machine***-Roller Type (H-steel dedicated)

Characteristics

1 Improve the corrosion resistance of the mechanical products and the technical materials

2 Improve the anti-fatigue performance of the H-steel and increase its service life

3 Optimize the art-statue appearance of the H-steel

4 Highly improve the cleaning efficiency

5 Reduce the cleaning labor strength

6 Reduce the environmental pollution

7 cleaning range of the H-steel: *******0mm

 Technical Parameters

Key technology and assurance measures - we do better...

Workpiece conveyor system:

1. One of the roller sides has steel plate to arrange the roller, to be convenient to load the material.                         

2. The whole workpieces conveyor system is frequency timing, not only to synchronously running, but also can individual operate.                              

3. The roller of Shot blast cabinet has special wear-resistant jacket.

Shot blasting cleaning chamber

1. Workpieces detect devices are out of the shot blast cabinet to avoid the shot and power dust.
2. With Switzerland +GF+ shot blast Wheel, shot blast quantity are large, the life of the blade more than **0 hours.    

3. Workpiece height measurement, automatically adjust the open of the shot valve.

Shot cycle purifying system

1 Elected to adopt full curtain air separator,
2 The use of a dedicated core polyester hoist belt,
3 Projectile controller controlling the use of gas
4 Ball point of the circulatory system has the power failure alarm function

Shot dust collecting system

With large-scale cyclone + filter dust catcher. Power dust exhausting less than *0mg/m3  

Painting spray chamber

The two set  high compressed airless painting pump detecting device,running system and gun spraying device can avoid fume disturb and improve the running

Electric control system

With PLC control, computer dynamic simulating monitoring system can carry out the producing line automatically control