OUTPUT
MAX applicable motor power from0.75KW~315KW
Output capacity from 1HP~400HP
Rated output current from 3.4A~605A
MAX output voltage: Three Phase 380-460V
Rated output frequency: as high as 400Hz
INPUT
Input voltage: Three phase 380-460V
Input frequency: 50Hz&60Hz
Permissible variation of volatege: +10%, -15%
Permissible variation of frequency: +/- 5%
CONTROL
Control mode: Magnetic vector control, shine wave PWM
Starting torque: 150%/1Hz (or 150%/min, with PG), free to set
between 100~300%
Speed control range: 1:100 (1:1000, with PG)
Control percision: +/-0.2% (+/-0.02% with PG)
Speed response: 5Hz(30Hz with PG)
Torque limit: Applicable (4 parameter setting modes)
Torque percision: +/-5%
Torque response: 20Hz (40Hz with PG)
Frequency control range: 0.1~400Hz
Overload capacity: 150% of rated current for 1 min
Acceleration/deceleration time: 0.01~6000.0s(acceleration and
deceleration time can be set independently, 4 kinds of time may be
selected)
Braking torque: 20%(additional braking resistance can reach as high
as 150%)
Voltage/frequency characteristics: 15 selectable fixed V/F
characteristics and setting of random V/F
characteristics.
PROTECTION
Motor overload protection: Electric thermal electricity
protection
Instantaneous over current: When current is 200% of the rated
current, the motor will stop freely
Fuse blow-out protection: Motor free run and stop
Overload: When output is 150% of the rated output for 1min, the
motor will freely run and stop.(150% for 2min is available upon
request)
Over voltage: Stop at main circuit voltage over 820V
Under voltage: Stop at main circuit voltage less than
380V
Instantaneous power-off compensation: The selected running mode is
within 2s, If the power is off, it returns to zero, and after the
power resumes its normal state within 2s, it goes on
running
Over heat of radiation fan: Protected by the temperature
switch
Stall prevention: Acceleration/deceleration, stall prevention in
running
Earthing fault: Protected by the electronic circuit
Charging protection: No display at main circuit DC voltage below
50V
ENVIRONMENT
Ambient temp. : -10 degreeC~+40 degreeC (Locked&wall-mounted
type)
-10 degreeC~+45 degreeC (Cabinet
opened)
Humidity: Lower than 90%RH
Storage temperature: -20 degreeC~+60 degreeC
Applicable location: Indoor(no corrosive gas)
Elevation: 1000M below
Vibration: Less than 9.8m/s^2(0.2G) at 20Hz