الوصف
HGM Series Ultrafine Grinding Mill is mainly applied to
non-inflammable, non-explosive and brittle materials with
Mohs-hardness under six. Such as calcite, chalk, limestone,
dolomite, kaolin, gypsum, etc, totally more than **0 kinds of
materials. Product fineness can be controlled between *******0
mesh. Performance and features: 1. High efficiency Under the same
final size and power, the product capacity of ultrafine mill is
twice than jet mill and agitation mill. 2. Longer lifetime of spare
parts The roller and ring are made of special material, which
improve grinding efficiency a lot. For same material and final
size, the lifetime of its wearing parts can reach to more than one
year, about **5 times as long as that of vertical shaft impact
crusher and turbo-mill. Especially when handling calcium carbonate
and calcite, the lifetime can reach **5 years. 3. High safety and
reliability There are no rolling bearings and bolts in grinding
cavity, so problems caused by bolts shedding or wear of bearings
and seal components will never happen. . 4. High fineness of
products The product fineness can reach D*7≤5μm. 5. Environment
friendly The application of pulse dust collector and muffler reduce
the pollution and noise of the dust, which has reached national
environment protection standard. Working Principle The whole system
of HGM consists of hammer crusher, bucket elevator, storage hopper,
vibrating feeder, main unit, inverter classifier, cyclone
collector, pulse dust system, high pressure positive blower, air
compressors and electrical control systems. The main bearing and
each dial are driven by electromotor of main machine through
reducer, and numbers of rollers, which are rolling in the ring, are
driven by dial through plunger. After crushed by hammer crusher,
the big materials become small ones and are sent to storage hopper
by elevator and further sent to the middle of first dial evenly by
the electromagnetic vibrating feeder and feeding pipe. The
materials will be driven to the edge of dial by centrifugal force
and fall down into the ring, crushed and grinded by roller, and
become powder after production of three rings. The high pressure
centrifugal blower will inhale air from outside and blow the
crushed materials to classifier. The rotating turbo in the powder
concentrator will make the course materials return to the mill and
reground, while the fineness will mix with the air and go into the
cyclone and be discharged in the discharge bin, which is at the
bottom of it. The air, which mixed with very little fineness, will
be purified by impulse duster and discharged by blower and muffler.
بلد: |
China |
نموذج رقم: |
HGM10027
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
1 set |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
10 sets |
نوع الدفع: |
- |
مجموعة المنتج : |
Grinding Mill
|