سعر فوب
أحصل على آخر سعر( Negotiable )
|- Minimum Order
بلد:
China
نموذج رقم:
OD 19mm/25mm/32mmï
سعر فوب:
( Negotiable )أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
Wooden box
موعد التسليم:
face to face
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Mr. ALLEN
168 Jixin Road, Shanghai, Shanghai
High flux tube can be classified
into three groups: sintered high flux tube, sprayed high flux tube
and machined high flux tube. Among them, sintered high flux tube is
the most expensive for its complex processing method and high
efficiency; machined high flux tube is applied to mediums with high
surface tension, its performance is in between; sprayed high flux
tube is the cheapest for its easy process and low
efficiency.
On the one hand,
high flux tube can reduce the steam demand. On the other hand, it
can improve the heat transfer capability. In the large heat
transfer system, because of the need of small temperature
differences, the number of reboilers needed is very big. The use of
high flux tube can reduce 3/4 the amount of reboilers, and
temperature difference ΔT asks for only 5 ℃. Using high flux tube
to replace traditional bare tube can eliminate heat transfer
bottlenecks, meet the needs of larger heat load, and significantly
increase production. At the same time, under the condition of
keeping the same efficiency, it can reduce the cost.
Material and size of High Flux Tube
Material: nickel-copper
alloy(C****0,B*0), carbon steel(SA**9,*0#), aluminum alloy
(***3), stainless steel(**4L,**6L)and so on.
Size: OD
*9ã€*5ã€*2mm,length ***0~****0 mm
Under normal condition, the middle of High flux tube
is enhanced section. Both ends are smooth. It is easy to wear tubes
and easy for expansion joints. We are OEM of high flux tube and can
produce according to customers' needs. Products are packaged with
wooden boxes.
Applicable medium of high flux heat
exchangers
Ethylene glycol,
light olefin, refrigerant, liquid oxygen, liquid nitrogen.
Applications of
high flux heat exchangers
High flux heat
exchanger can be used in phase change equipment, such as,
carburetor, evaporator, reboiler and condenser, etc.
Sintered High Flux Tube
Machined high flux tube is a kind of high efficient heat transfer tubes manufactured by rolling process of bare tubes, the structural features are a series of spiral-ring T type tunnel, which are formed in the outer surface of the tube.
Characteristic
of machined high flux tube Machining is a method with low cost
and easy to process, and the porosity of porous coating is **-
*5%.
Sprayed High Flux Tube
The coating on sprayed high flux tube is formed by spraying guns which melt and spray the compound of Ni-wrapped Al powder and pore-forming materials. This can only process the outside surface of high flux tube, which has only *0% of heat transfer efficiency of sintered high flux tube, *0% service life of sintered high flux tube. But it is easy to manufacture and much cheaper.
بلد: | China |
نموذج رقم: | OD 19mm/25mm/32mmï |
سعر فوب: | ( Negotiable ) أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | Wooden box |
موعد التسليم: | face to face |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | - |