سعر فوب
أحصل على آخر سعر9 ~ 17 / Set ( Negotiable )
|1 Set Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
9 ~ 17 / Set ( Negotiable ) أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
9 per Set
الحد الأدني للطلب:
1 Set
تفاصيل التغليف:
20kg/set(A10kg+B10kg), packaging with bucket
موعد التسليم:
7 days
القدرة على التوريد:
10000 Kilogram per Day
نوع الدفع:
T/T
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Joe
Guangzhou, Guangdong
Before The Curing
| Performance Indicators | A | B |
| Appearance | Gray Fluid | White Fluid |
| Viscosity | ***0~***0(cps) | ***0~***0(cps) |
| A:B | 1:1 | |
| Mixed Viscosity | ***0~***0(cps) | |
| Operable Time | *0~**0(min) (Adjustable) | |
| Curing Time | 3~5(h) | |
After The Curing
| Hardness | *0~*0(Shore A) |
| Dielectric Strength | ≥*0(kV/mm) |
| Dielectric Constant | 3.*2(1.2MHz) |
| Thermal Conductivity | ≥0.6[W/m.k] |
| Volume Resistivity | ≥1.0×***4(Ω·cm) |
| Specific Gravity | 1.*6±0.*2(g/cm3) |
| Flammability Rating | UL*4 V*0 |
•*0kg/set(A*0kg+B*0kg),
packaging with
bucket.
METHOD OF OPERATION
INSTRUCTIONS
Preparing: Stir
completely A and B in each
container,
Mixing:A
and B
should be fully mixed according to the
weighting ratio. Add B to
A. Stirring(stir
the glue dedicated blade) and mixing. Note that: should be
mixedthoroughly when
mixing the wall
rubber of container into the plastic
material.
De-airing: after mixing which should
vacuum degassing for **3 minutes.
Potting: The mixture
should be
poured into the product as soon as possible, in order to
avoid thickening
and resulting in poor fluidity.
Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing . The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for *5 minutes at *0 ° C ~ **0 ° C, about *2 hours at room temperature.
MATTERS NEEDING ATTENTION
NOTE
1,The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
2,The product dont belong to dangerous goods, but avoid contacting skin and eyes.
3,The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
4,Stored for a period of time, the plastic may be layered. So please stir well before using, and cant affect its performance.
5,The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A, incompletely cured condensation type silicone rubber.
B.amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
SPECIFICATION TRANSPORT
PACKAGING
1,*0kg/set(A*0kg+B*0kg), packaging with bucket.
2,1 year shelf life if stored below *5 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
3,These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
| بلد: | China |
| نموذج رقم: | - |
| سعر فوب: | 9 ~ 17 / Set ( Negotiable ) أحصل على آخر سعر |
| الموقع: | - |
| سعر الحد الأدنى للطلب: | 9 per Set |
| الحد الأدني للطلب: | 1 Set |
| تفاصيل التغليف: | 20kg/set(A10kg+B10kg), packaging with bucket |
| موعد التسليم: | 7 days |
| القدرة على التوريد: | 10000 Kilogram per Day |
| نوع الدفع: | T/T |
| مجموعة المنتج : | - |
silicone grease for domestic appliance with high thermal conduction
US$ 6~ 12 / Piece ( Negotiable )
silicone grease for domestic appliance with high thermal conduction
US$ 6~ 12 / Piece ( Negotiable )
