High transparent anti-yellowing magic epoxy resin for Christmas ball ornaments By Shenzhen Jinhua Electronic Materials Co., Ltd.,

High transparent anti-yellowing magic epoxy resin for Christmas ball ornaments

سعر فوب

أحصل على آخر سعر

5 ~ 8 USD / Kilogram ( Negotiable )

20 Kilogram Minimum Order

بلد:

China

نموذج رقم:

305AB

سعر فوب:

5 ~ 8 USD / Kilogram ( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

5 per Kilogram

الحد الأدني للطلب:

20 Kilogram

تفاصيل التغليف:

20kg each set

موعد التسليم:

three days

القدرة على التوريد:

10000 Kilogram per Month

نوع الدفع:

T/T, L/C, D/A, D/P, Western Union

مجموعة المنتج :

مواصفات المنتج

Classification: Double Components Adhesives
Usage: Christmas ball crystal glue
Brand Name: jinhua

color:transparent

الوصف

Epoxy Resin **5AB
Feature
Epoxy resin **5AB can be cured under normal temperature and low temperature, it is a dome epoxy glue, natural defoaming, high transprancy, easy operation, it can be cured at room temperature or high temperature. ..

Application
**5AB can be widely used for hairpin decoration, ring, jewelry decoration, lamp decoration, cambered surface, etc..

Properties before Hardening

Part	**5A	**5B
Color	Transparent	Transparent
Specific gravity	1.15	0.96
Viscosity (*5â„ƒ)	*0-**0CPS	*0 MAXCPS
Mixing ratio	A: B = *0:3(weight ratio)
Hardening conditions	5 â„ƒ×0H to 12H or *5â„ƒ×2.5H (2 g)
Usable time	5â„ƒ×60min (*0g)

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below *5 â„ƒ, please heat A glue to *0 â„ƒ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than *5%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than *5%, is not suitable for room temperature curing, suggest to use the heat curing.

Properties after Hardening

Hardness, shore D	<*2
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	*7
Volume resistivity, Ohm3	1x05
Surface resistance, Ohmm2	5X05
Thermal conductivity, W/M.K	0.*7
Induced electric loss, 1KHZ	0.*2
Withstand high temperature, â„ƒ	**0
Moisture absorption, %	<0.*5
Compressive strength, Kg/ mm2	9.4

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the tempeture of *5°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of *5°C.

Notice: The above data is typical data measured by the laboratory environment under
the temperature of *5 â„ƒ, and humidity of *0%. For customers reference only.

بلد:	China
نموذج رقم:	305AB
سعر فوب:	5 ~ 8 / Kilogram ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	5 per Kilogram
الحد الأدني للطلب:	20 Kilogram
تفاصيل التغليف:	20kg each set
موعد التسليم:	three days
القدرة على التوريد:	10000 Kilogram per Month
نوع الدفع:	T/T, L/C, D/A, D/P, Western Union
مجموعة المنتج :	-