الوصف

Preparation of raw material:

The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details:
Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should dry it firstly. Methods as follows:
1. Dry in the sun: if you have enough area, you could dry the material in the sun. You should often stir it.
2. Squeeze water from material using a large power extruder.
3. Dry the material using a spin-drier.
If the raw material is waste tire and its diameter is over 1.4 meter, should cut the inner ring firstly.
 

The area space need of pyrolysis plants:

It is usually *3 feet width and **1 feet length for the *0 tons capacity machine.

Waste plastic pyrolysis to oil process:

a.Huayin waste plastic pyrolysis plant use auto-feeder to feed the waste tires into reactor automatically, seal the feeding inlet door tightly, which could save labor and time.
b. Heat the reactor by burning the following fuel material: coal, wood, natural gas, or fuel oil in the combustion system. The reactor will be heated slowly, when the temperature reaches around **0 degree Celsius, the oil gas will be formed.
c. After processed by huayin waste tire recycling pyrolysis plant, the oil gas will go to the cooling system to be liquefied. The gas which can not be liquefied under normal pressure will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy.
d. After finishing oil collecting, the temperature of reactor will be down, while, carbon black can be discharged automatically at the same time.
e. when the temperature falls down to **0 degree Celsius, workers can open the door of reactor to discharge the steel wire.
f. Start another batch working.

Profits analysis:

Benefit analysis of producing 1 ton crude oil
Waste plastics to product crude oil as an example
The price of waste plastics: **0RMB/T The average oil rate:*8%
1ton of crude oil feedstock costs: (1÷*8%) ×**0=**5RMB
Coal costs: 0.4T **0RMB/T=**0RMB
Cost of electricity: **0RMB
Labor costs: 4 ×*0= **0RMB
Crude oil market price: ***0RMB/T
The production of one ton of crude oil profits: *******5 ***0 *******0=***5RMB