Uptime

• Advanced John Deere Phoenix Electronic Control System provides high electrical system reliability. Electrical system uses minimal relays and unsealed connections. Most circuits are controlled by the Flex Load Controller (FLC). Monitor, Sealed Switch Module (SSM), and FLC all communicate on Controller Area Network (CAN), which minimizes number of wires.
• Powered by proven, reliable Isuzu engines. The ****8B use a 6.5 L turbocharged engine and the ****8B uses a 7.8 L turbocharged engine. All engines are Tier 2/Stage II emissions compliant.
• Sealed Switch Module (SSM) conveniently combines most cab switches into one central location. SSM is well protected from dust and moisture, and it has a much longer life cycle than rocker switches.

• MODEL	XCG**0LC*8B
  Rated bucket capacity	0.9 m3
  Operating weight	****0
  Engine
  Model	ISUZU BB*6BG1T
  Rated output	**0kW/***0 rpm
  Bore × stroke	**5/**5 mm
  Displacement	6.**4 L
  Max. torque	**2.5 Nm
  Batteries	2×*2 V
  Hydraulic System
  Main pumps	2x Variable displacement axial piston pumps
  Max. flow	2x **0 L/min
  Hydraulic motors
  Travel motors	2x Variable displacement axial piston motors
  Swing motors	1x Fixed displacement axial piston motor
  Relief valve setting
  Implement circuit	*1.4 Mpa
  Swing circuit	*5.5 Mpa
  Travel circuit	*1.4 Mpa
  Pilot circuit	3.9 Mpa
  Max. bucket digging force	**5.4 KN
  Max. arm digging force	*9 KN
  Swing System
  Swing speed	*3.5 rpm
  Drive
  Max. drawbar pull	**3 KN
  Travel speed
  High speed	5.3 Km/h
  Low speed	3.2 Km/h
  Max. grade ability	*5o
  Undercarriage
  Carrier rollers	2x 2
  Track rollers	2x 9
  Track pads	2x *9
  Shoe width	**0 mm
  Ground pressure	*1.*3 kPa
  Capacities
  Fuel tank	**0L
  Hydraulic tank	**0 L
  Hydraulic System	**0 L
  Cooling system	*8 L
  Engine oil	*1.5 L
  Travel reduction unit	2x 5 L
  Swing teduction unit	4.4 L
  Working Ranges
  Max. cutting height	***7 mm
  Max. dumping height	***5 mm
  Max. digging depth	***0 mm
  Max. vertical wall digging depth	***0 mm
  Max. digging reach	***0 mm
  Max. digging reach on ground	***0 mm
  Min. front swing radius	***8 mm
  Standard boom	***0 mm
  Standard arm	***0 mm
  Dimensions
  Overall length	***2 mm
  Overall height of boom	***5 mm
  Overall Width	***0 mm
  Overall height of cab	***0 mm
  Counterweight clearance	***0 mm
  Min. ground clearance	**8 mm
  Tail swing radius	***0 mm
  Track ground length	***0 mm
  Track length	***0 mm
  Track gauge	***0 mm
  Track overall width	***0 mm
  Shoe width	**0 mm
  Overall height of counterweight	***0 mm
  Overall width of superstructure	***0 mm