1.Basic Concept:

             Coating film in one surface of the general glass layer with  conductive film of indium oxide and tin plating to form a common LCD glass, indium tin oxide, commonly referred to as ITO glass. 
       As the nanoITO indium tin metal oxide, with good conductivity and transparency, can cut harmful electronic radiation, ultraviolet and far infrared. Therefore, after spraying on glass, plastic and electronic display, while enhancing electrical conductivity and transparency cut harmful electronic radiation and ultraviolet and infrared. 

       ITO conductive glass is based on calcium sodium borosilicate alkyl group, or a piece of glass on the use of magnetron sputtering coated with a layer of indium tin oxide (commonly known as ITO) film manufacture into. ITO conductive glass LCD display only, but also before the ITO coating layer coated on the barrier layer ***0nm thick silicon dioxide layer is mainly to prevent the soda lime type of diffusion of metal ions in the substrate to penetrate into the ITO layer, the impact of conductivity of ITO layer. Special highgrade liquid crystal display before the ITO glass substrate by sputtering an ITO layer but also for polishing a glass to obtain a more uniform display control. 

       ITO coating methods are: a spray method; coating method; impregnation method; chemical vapor deposition method; vacuum evaporation; measured sputtering method, but the most effective way to industrialization of the measured magnetron sputtering method. 

       At present, Shenzhen Sanxin Special Glass Co., Ltd. is a beautifully performed ITO coating by magnetron sputtering method measured, magnetron sputtering coating principle is: in a high vacuum reaction chamber filled with a gas mixture of Ar *2 and a certain percentage of the DC under high pressure, Ar is ionized in the electric field bombardment target, indium and tin ions in the form of sputtered atoms and, deposited on the glass surface of the substrate while being oxide, indium tin oxide film is formed. 

        Advanced ITO coating production lines and sophisticated processing technology management, production level of resistance TN STN with the ITO conductive glass (lowest plating 3 ohms ultralow resistance ITO glass) and touch screen with the ITO glass, optical vanishing ITO glass, OGS monolithic (BM + ITO) coated glass, OGS large (BM + ITO) coated glass, TFT lowtemperature ITO coated glass coating products, widely used in electronic products, touch screen products, highend LCD products.

 

2.Application:

        AR glass is mainly used for display device, such as LCD TV, PDP TV, laptop, desktop computer monitor, instrument panel, touch screen, picture frame glass and other electronic products to improve the transmission rate lower reflectivity,avoiding image being influenced by backside strong light,enjoying more clear image.