Infusion pump (infusion equipments)

الوصف

INFUSION PUMP OPERATION GUIDE

1. Fix infusion pump onto infusion support, connect it with **0V AC power supply and keep pushing the on-and-off keying for more than 1 second to start the infusion pump.

2. Install infusion tube according to Schematic Diagram of Infusion Tube Installation and ensure no air bubbles in the infusion tube
3. Close pump door and set infusion rate through   and  . Push set keys before setting infusion
volume through   and   .
 
4. Through pushing injection/standby key, the infusion pump will work at the given rate. When it reaches the given infusion volume, infusion pump will stop automatically.

5. If there are air bubbles in the infusion tube, infusion pump will stop automatically and air bubble fault light will turn on with alarm. In this case, open the pump door to expel air bubbles. Close the pump door and push injection/standby key to continue infusion after air bubbles are completely expelled.

6. When the infusion tube is blocked, infusion pump will stop automatically and block fault light will turn on with alarm. At this moment, close the liquid stop apparatus before checking causes for blocking. After remedying faults, push injection/standby key to continue infusion.

7. If the pump door is not closed, infusion is prohibited. If the door is opened during infusion, the pump will stop working automatically and door fault light will turn on with alarm.

8. Please refer to Instruction for options and setting of infusion tube and other operations.