الوصف

I

Introduction:

Critical Radiant Flux of the main parameters of flooring materials evaluate the fire risk, and it characterizes the flooring material samples subjected to conditions at the thermal radiation from outside flame.

According ISO*****1,2  requirements, and flooring heat radiating plate test is in the chamber, through a certain heat radiation environment, measure critical radiant floor coverings Combustion case value. Radiation can also be used to measure the critical value of attic floor cellulose insulation material.  

International standards:

1. GBT****5
2. ISO***9
3. ASTM**8
4. NFPA**5


 

Features:

1, All structural components are made of stainless steel, nice appearance, corrosion resistance;

2, The radiation source is a porous ceramic heat radiating plate **0mmX**0mm, tilted *0 °;

3, Imported calorimeter from US Medtherm company, range *0KW /m;

4, Igniters diameter of 0.7mm from the bottom of the center line of each **-degree position according to standard request.

5, The standard plate is made of thick *0 ± 1mm, density **0 ± **0kg / m³ without coating made of calcium silicate board; size ***0X**0mm

6, Small stainless steel auxiliary ignition burner ignited sample.

7, Imported flow control meter from Japan, precise control of the flow of propane 

8, Equipped with air blower providing air, mixed gas through the venturi mixing test gas,

9, The specimen holder is made of stainless steel and an overall dimension of ***0mm x **0 mm.

specification