Knife Gate Valve (pneumatic, electric, hydraulic, chainwheel, lever)

الوصف

The QB model knife gate valve is an uni-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids in industries such as:
Wastewater treatment plants
Chemical plants
Food and Beverage etc.

Body:
Wafer style cast monoblock with raised face, with reinforced ribs in larger diameters for extra body strength. Internal cast-in gate wedges and guides allows for tighter shut-off. Full port design for greater flow capacity and minimal pressure drop design avoids any build up of solids that would prevent valve from closing.

Gate:
Stainless steel gate as standard. Gate is polished on both sides to avoid jamming and seat damage.Bottom of the gate edge is machined to a bevel to cut through solids for a tighter seal in the closed position. On request: thickness and/or material of the gate can be changed for higher pressure requirement.

Seat: (resilient)
Unique design that mechanically locks the seat in the internal of the valve body with a stainless steel retainer ring. Standard EPDM also available in different materials such as NBR, Viton, etc.

Stem:
The standard stainless steel stem offers a long corrosion resistant life.

Epoxy coating:
The epoxy coating on all JCS cast iron and carbon steel valve bodies and components is electrostatically applied making the valves to be corrosion resistant with a high quality finished surface.

Materials:
Body:WCB, **4, **6, **6L
Gate:2Cr*3, **1, **4, **6, **6L
Stem:2Cr*3, **4, **6
Sealing:EPDM, NBR, Viton, PTFE, Metal, Stellite