الوصف

CONTROL PANEL ;

*5 memory enterance for toner capasity automatic filling system.
2 main motor and process control panel
Automatic refill system and emergancy stop
Temperature control panel – Air and room temperature stabilization
On the same time usage of 3 motor / 3 different toner powder filling system control
Resistance system to keep a constant temperature of toner powder
We can check and control the outside tempetature and inside of machine temperature
We can check and control the outside and inside of the machine humidity
The control system shows you min. and maximum temperature / humidity degree.
We can reset the system

TONER POWDER FILLING UNIT 
                
*0 kgs toner powder capasity
2 different toner powder model filling system
Easy opener toner powder tank system – you can change or transfer the powder easily from the tanks
Toner powder tanks : Inside of the powder places have 2 different mixer for ensure the fluidity of toner powder
If toner powder waits and stops make stone formation
These mixer is absorb the calcification and solidification
Flows where the toner powder has a 2 different mixer too.
It has working places for doing open and closed process on the table

CLEANING / VACUUMING / FILTER / COMPRESSOR

The filters are changable cartridge ( removable) types which can fitler 0,2 micron particulates ( as small as cigarette smoke particules ) It filters to the DIN EN ****5 standard for Class M specks.
The fully isolated body for Noise reduction at >*0dB (A)
Working basa is  designed for comfortable work
Waste toner dust is collected in the compartment positioned under the machine for easy access and emptying
The machine can be easily moved on the swiveling

VACUUM UNIT :

In working places ,refilling and bottling area has high vacuum system.
This vacuum system attracts the toner powder in the air at run-time
On the refill unit both right and left side has vacuum places – The system work on the same time

Laser toner has waste places we need to transfer that waste powder to waste tank. After that we need to vacuum waste tank part – drum and places of toner. We need to use hand vacuum for this process.
In working places need to clean from waste toner powders too.Include for cleaning filter and working places air gun.

COMPRESSOR

**2L/Min   /  8 Bar  /  Hz : *0 / Power:*0Hp / **0 luxury air function fan
Duty Cycle : %*0 / *5lt capasity  /  Decibe : *0dB