LCD display GSM PSTN wireless alarm system with touch keypad FS-AM362

الوصف

GSM Security system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. When a signal is detected by detectors, the detectors will send alarm signal to system immediately. The system then sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials the pre-set telephone/mobile phone numbers automatically.

GSM&PSTN Dual-Network Burglar LCD Display Alarm SystemFS-AM**2 touch keypad
1)Adopts GSM cellular and PSTN dual network technology for alarm transmission.
2)GSM 3/4 Band Net transmission, phone audible alarming and SMS alarming
3) Elegant and advanced touch keypad for easy operation
4)Touch keypad, LCD displays Date, Day of the week, Time, and current Armed Status
5)Supported Multiple Languages to meet different market needs.
6)*5 wireless alarm zones (Each zone can be added up to 4 sensors) and 2 dedicated zones for remotes (Each zone can be added up to 4 remotes control or wireless alarm keypads per zone). Optional 8 more hardwire zones
8)Can preset 5 group phone numbers and dial in sequence, with functions of recording, voice indicating and monitoring.
9)Can record *0 seconds of voice message. when alarm is triggered, it can automatically play the voice message.
*0)5ways to Arm/Disarm Alarm System: Main Host(keypad),SMS, Wireless Keypad, Remote Control,or remotely by phone.
*1)Alarming Priority, built-in back-up battery, AC/DC power both available. analysis technology for logic function corresponding zone number and sensor name can be displayed.
*2)Learning sensors to alarm host, very easy operation.
*3) Support wireless “ding-dong” doorbell function (Optional)
*4) Support CID uploading to CMS(Center monitoring Station) , can user our GSM CID connector to have this function.
*5) Check doorwindow status automatically (It happen when the system is disarmed only, if a door is opened, it will sound fast “bi bi bi”)
*6) Available in ACDC with Low-voltage Indicators
*7) Learning sensors to alarm host, very easy operation.
*8) Non-volatile chip, information stored automatically when off power
*9) Four Bands GSM module (**0/**0/***0/***0MHz), Can be used all over the world
*0) Wireless Standard package: Alarm panel, 1pc Indoor flashing Siren, 1pc PIR Detector,1pc door sensor, 2pcs Remote Control  (optional with rechargeable lithium battery)
 
DIY package:
1.GSM LCD Alarm Panel.
2.Wireless Optional Accessories: remote, wireless intelligent door sensor(or wireless door sensor) wireless wide-angle PIR sensor, , wireless indoor siren with sound and flash,gas alarm, smoke alarm, wireless outdoor siren, doorbell
Specifications:
1)Working power: AC=**0~**0V, DC=*2V  1A
2)Static current:
3)Built-in Li-Ion backup battery: 3.7V **0mAH(rechargeable),
4)Standby: around *6 hours, Full charging time: *2 hours
5)*-Band & *-Band optional
6)GSM transmit power: 2W 
7)Receiving and emitting frequency: **3MHz, **8MHZ
8)Working condition:Temperature: **0ºC ~ *0ºC   Humidity:＜*0%
9)Product dimension:**1×**7×*9(mm)