LED Tube T8 Star Series 1200mm 18W/20W

الوصف

 1. Description:
Star series, as its literal meaning, is the best-selling T8 tubes in the company. The vision-friendly light effect makes people feel comfortable even when looking directly at the tube light. Wide beam angle of **0deg compensates the poor effect of normal LED tubes of *****0deg angle. Ideal to be used for office lighting.
Available in length of *0mm/ **0mm/ ***0mm/ ***0mm
The TUV certificate is in process on this series and would be launched in March.

2. Advantage:
> Exclusive mold involving heat sink/ driver/ circuit design for better heat dissipation;
> Within 3deg Centigrade temperature difference between aluminum profile and solder pad of LEDs to prove, on one hand, that the heat generated from LEDs has been transferred quick to air.
> Single/ double ends power-in for safety concern, meets the regulation from Europe/ USA
> A rotated end cap in 0° / *0° Position to fit different demands
> Star Series have a wide beam angle up to **0deg with **8 lm per LED.
> NO dark area along both sides and the light emission is uniform.
> High luminous efficiency up to *5lm/W

3. Feature:
> Instant on/ off
>No UV/ flickering
>Wide beam angle
>Superb light effect especially in milky cover
> Up *0% energy saving and power consumption
>Certificate: CE, RoHS

4. Packing
Net Weight: 0.**0kg/1PCS, *1.4kg/*0PCS each carton
Gross Weight: 0.**0kg/1PCS, *6.5kg/*0PCS each carton
Package Size: L***5*W**1*H*1mm/6PCS each layer, L***0*W**8*H**6mm/*0PCS each carton

5. Applications
A. Suitable for all places where require long time lighting, such as underground parking garage, Tunnel, underground passage, warehouse, supermarket, office, etc.
B. The ideal lighting for anywhere that wants to avoid UV, such as beauty parlor, cosmetic show case, wardrobe, etc.

6. Installation
Step I Identify
Turn off the power, and take off the traditional old fluorescent tube from the bracket. Then, inspect and confirm what kind of ballast it is on the bracket, inductance ballast or electronic ballast.

If you cannot identify what kind of ballast it is, Please check whether there is a starter on the bracket. If there is a starter, it should be inductance ballast; Otherwise, it should be electronic ballast (see the Figure 1 above).

Step II Inductance ballast
If it is inductance ballast on the bracket, please take the starter away first( see the following Figure 2), then installed the LED fluorescent tube on the bracket.

Step III Inductance ballast
Check out whether the LED fluorescent tube has installed correctly on the bracket: The cover is supposed to be opposite to the bracket and the aluminum side faces to the bracket (see Figure 3)

Step IV Inductance ballast
Check again whether the starter has been taken away. If so, turn on the power, then the LED tube light will illuminate. If the LED tube cannot illuminate, please recheck it following step I~III

Step V Electronic ballast
If it is electronic ballast on the bracket, please take the electronic ballast away first. Then connect the live /neutral power cable with the connectors on both ends of the tube holders. Please refer to Figure 5, for the connection of electronic ballast. After taking the electronic ballast off, the connection method please refer to Figure 5.

Step VI Electronic ballast
After connecting power cable in the bracket, please check again following step III and step IV.