life casting silicone rubber for sexy dolls

الوصف

Product Description

1. Description of  life casting silicone rubber    

XB***0  life casting silicone rubber is addition cure silicone rubber for silicone products. The silicone rubber will be cured under room temperature and can be cured fastly by heating. It's two components liquid silicone rubber, the mixing ratio is 1:1. It has an exceptional fluidity and good operability. Especially, the platinum cure silicone rubber has a lower shrinkage, higher temperature resistance and it is medical grade. 

XB***0 life casting silicone rubber is extremely soft and the viscosity is very lower. 
2. Characteristics of  life casting silicone rubber
* An exceptional fluidity and good operability 

* Good tensile strength and tear strength

* Medical grade silicone rubber 

* High temperature resistance

* Good flexibility

* No smell, non-toxic

* Long shelf-time &lifetime

* Lower shrinkage

3. Application of  life casting silicone rubber 

(1) Make soft products ,as sex toys, sex dolls, body organs; 

(2) Body breast enhancers, bra pads, shoulder pads, paster, patches, antislip mat;

(3) Human body shape, simulate robots, simulate props;

(4) Simulate people, prostheses, masks.

4. Operating instructions of life casting silicone rubber

Step 1: Prepare and clean the prototype.

You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way.

Step 2: Take the silicone and catalyst as the ratio 1:1 (silicone : catalyst= 1:1), mix the silicone rubber and catalyst evenly.

Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber.

Step 3: Vacuum pumping.

After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.

Step 4: Pouring cast or brushing cast.

After released the bubble, we can pour/brush the silicone rubber on the prototype.

Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.

5.Datesheet of life casting silicone rubber