الوصف
Liquid Line Magnetic Separators Traps are
designed to extract the ferrous materials from the slurry or liquid
raw materials in order to purify the material in the production
process. Strong magnetic tubes filter the flow and extract the
unwanted ferrous metal. The unit is simply connected to the
existing pipeline via flanged or threaded ends. Simple and easy
access is possible using the quick release lid. Cleaning of the
magnets is easily accomplished by removing the cover plate of the
housing and sliding out each magnet assembly.
Liquid Line Magnetic Separators Application
:
- Liquid Line Magnetic Separator are engineered to remove ferrous
contaminants from liquid and slurry lines
- Efficiently remove tramp iron before maintenance and product
contamination problems occur
- The benefits of this magnetic separator can be experienced in
most cases with no appreciable pressure drop or reduction in flow
rates
- All units incorporate a sump type housing to trap non-ferrous
particles. Liquid Traps may be installed horizontally, vertically,
or on an angle without affecting their magnetic efficiency
Liquid Line Magnetic Separators Construction
:
- **0% Stainless Steel construction
- Liquid tight with food grade O-rings
- Easy access for inspection and maintenance
- Tri-clamp, Bevel-seat (Acme thread), or weld end inlet and
outlets
- It is equipped with high-energy Rare-earth Magnets. Diameter of
magnetic bar is 1"
- Construction uses Type **4 stainless steel. Type **6 stainless
steel available on request
- It can be fastened by screw nuts; it also can be fastened by
band clamp
- Easy-clean type can be provided on request
Cage Style "T" Traps :
T-Trap Liquid Line Magnetic Separator are designed for heavy duty,
large volume liquid and semi-liquid line flow systems.
The T-Trap employs a slip-in cage of stainless steel permanent
magnetic tubes, which capture ferrous tramp metal particles and
improve the purity of the product.
As the particles collect, they migrate to the rear of the tubes
where they remain protected from wash-off until the tubes are
cleaned.
With its top access bolt-on steel plate and seal, the T-Trap is
easy to clean. Simply remove the top.
Plate Style "T" Traps :
When tramp metal protection is required for liquid lines carrying
viscous to fibrous products, the plate style T-Trap is ideal. This
magnet allows the product to flow through the housing without
causing product bridging.
An interior baffle is used to direct the entire product flow
towards the powerful plate magnet, ensuring that tramp metal is
forced into the magnetic field. Installation of the plate style
magnet can be in any position.
بلد: |
India |
نموذج رقم: |
-
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
1 Box |
تفاصيل التغليف: |
Wooden Grate according to the sizes |
موعد التسليم: |
7 days |
القدرة على التوريد: |
1 Box per Month |
نوع الدفع: |
T/T, D/P |
مجموعة المنتج : |
Magnetic separator
|