Low voltage 0.6/1kV swa electrical cable

الوصف

0.6/1kv swa electrical cable

0.6/1kV swa electrical cable is used to transmit and distribute power in power transmission and distribution system of *5kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

Standard

The0.6/1kV swa electrical cable can be produced according to our factory specification which is equivalent to the standard IEC****2, GB/T ****6. The factory can also design and manufacture special power cable according to the other standards required by the customers.

Power cable Structure

The basic structure of power cables by the core (conductor), an insulating layer, a shielding layer and a protective layer of four parts.

1. The core is conductive part of power cable, which is used to transfer power, is the main part of the power cable.

2. Insulation is the line between the core and the earth and the different phase of wire core in the electrical insulated from each other, is an indispensable part in the structure of power cable.

3. Shield  *0KV power cable shielding layer and more generally have a conductor shielding layer and an insulating shielding layer.

4. Protective layer  The role of the protective layer is to protect the power cable from the outside world the invasion of the impurities and moisture, and prevent the external force directly damage the power cable.

Nominal Cross-sectional Areas

1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, *0 mm2, *6 mm2, *5 mm2, *5 mm2, *0 mm2, *0 mm2, *5 mm2, **0 mm2, **0 mm2, **5 mm2, **0 mm2, **0 mm2, **0 mm2, **0 mm2, **0 mm2, **0 mm2

Production range

Single core cable: from 1.5 mm2 to **0 mm2,

Multi-core cable: from 1.5 mm2 to **0 mm2

Operating characteristics:

Rated power-frequency voltage u0/u:0.6/1 KV

Max permissible continuous operating temperature of conductor *0

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor  **0 mm2

The anbient temperature under installations should not be below 0

The bending radius of single core cable should not be less than *0 times of the cable diameter ,the bending radius of multi-core cable should not be less than *5 times of the cable diameter

If you're interested in our 0.6/1kv swa electrical cable, pls feel free to contact me