الوصف

Start the Engine 1. The Process of Cleaning Before Driving Your Car: For cleaning the engine, **2 tank oil use is a standard, and then run your car slowly to run out of **2 tank oil, all ways down, the cleaning work is over, the car can run normally. 2. Turning on the Transmitter and The Receiver: Extending the antenna of the transmitter and the receiver, and then switch on the transmitter and the receiver in succession; while switching on the receiver, make sure the carburetor is at the neutral position. 3. Fill the fuel: Filling the special models fuel, and mix the gas and the lubricating oil, the rate of the gas to the lubricating oil is *5:1; close the fuel tank’s cover and fasten it after it after filling the fuel. 4. Starting the engine: Pushing the front valve several times until securely streaming out oil; shut down the wind gate, and turn the accelerograph to the position that spaces 1/**1/3 place of opening; pull the pulling-start rod until engine send out sound of start to start engine adjust the wind gate to the place which spaces 1/4 position of opening position; pull the pulling-started rod quickly; start engine several minutes to prewar. 5. Stop the engine: The engine will immediately stop running as long as you press the stall switch of the engine, please refer to the instruction manual (g**0 RC) for more details. Dear Friend: Please allow us to disturb your precious time. We are the Chinese biggest foreign trade wholesaler. We have our own warehouse and stores; we have clients all over the world. And we have been received very high praise from our customers. If you are interesting in our item, please contact us.