الوصف
Brief Description/Features of
Manual Molding Silicone
Rubber
Manual molding silicone
rubber
1. Good
elasticity
2.
Non-deformation
3. Heat
resistance
4. Low
shrinkage
a. Applications of Manual Molding
Silicone
Rubber
Manual Molding Silicone
Rubberis
mainly u, sed for model design of manual mold, PVC plastic molds,
cement products, low melting point alloy moldsalloy toys, plastic
toys, electronics, handicrafts, stationery, large-scale sculpture,
reproduction of cultural relic, shoe sole molds, pad printing
allocation, Electronic equipment ant vibration,
etc.
b. Model Codes of Manual Molding Silicone
Rubber
HY***8# is
applicable to make molds of smaller products and the production
will be **3
pieces.
HY***0#, compared
to other two types, for its moderate hardness and better quality
& performance, its production will be ****0
pieces.
HY***0# is
applicable to large size products duplications
andElectronic
equipment ant
vibration.
c. Operation Instructions
forManual
Molding Silicone
Rubber
RTV*2 Manual Molding Silicone
Rubberis
a flow able liquid, and the quality has nothing to do with the
color. It consists of two commonest. Part A is a flow able liquid
silicone rubber, part B is the curing agent. Firstly, after your
previous work of dealing with the original model, take some liquid
silicone rubber , add 2%*3% curing agent of the amount of silicon,
and mix them evenly. Then after vacuum-pumping the mixture, you can
pour it into the mold frame. The silicone mold will cured in **3
hours.
Note:The
time for vacuum-pumping should be less than 3 to 5 minutes,
otherwise, once the silicone rubber has cross-link reaction during
vacuum zing, it will not be
operated.
FAQ of manual molding silicone
rubber –
How to prevent
silicone manual molds getting
sticky?
The main reason
for this problem is that you do not handle the products or original
molds well, and then you should deal with the original mold or
products carefully before molding. Such as for the products with a
complicated pattern or an unsmoothed surface, you should polish and
clean the products, after which it will be molded, then spray the
release agent. Normally, the release agent can be Vaseline,
detergent, liquid wax, etc. In practical process, you can bush
different release agent according to different
material.
The second reason
is that the operator pours the silicone into the mold when the
mixture is mixed evenly, then the finish silicone mold will not
cure and dry entirely.
Further information
onManual Molding Silicone
Rubber is available. Please feel free to
contact Rose.
Mobile: ***************5
Tel: ****************4
Fax:
****************0
Email: newstarf(at)hotmail(dot)com
Skype: LuoYan***2
| بلد: |
China |
| نموذج رقم: |
N3528, N3540 manual mold silicone r
|
| سعر فوب: |
5.6 ~ 7.2 / Kilogram (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
Guangdong China |
| سعر الحد الأدنى للطلب: |
5.6 per Kilogram |
| الحد الأدني للطلب: |
200 Kilogram |
| تفاصيل التغليف: |
25kg/drum and 200kg/drum |
| موعد التسليم: |
within 5 days after payment confirmed in our bank. |
| القدرة على التوريد: |
8000 Kilogram per Day |
| نوع الدفع: |
T/T, L/C, Western Union |
| مجموعة المنتج : |
Manual Molding Silicone Rubber
|
