الوصف

Oxygen tube is used for steelmaking oxygen tube, generally with small diameter welding pipe,
 
specifications by 3/8 inch - 2 inch eight. With 8, *0, *5, *0, or Q**5 - made of Q**5 steel strip. For
 
corrosion protection, some aluminized processing.

classification
Aluminized fire resistant coating oxygen tube (PS) series PS series consists of substrate layer,
 
internal aluminized layer, the outer wall of aluminized layer, internal coating and coating, etc. A
 
total of five layers, is based on S series product development, combined with the actual needs of the
 
current electric arc furnace steelmaking, high refractoriness, less consumption, convenient operation,
 
etc
use
(1) in the eaf steelmaking oxygen or other gas, the electric arc furnace melting and refining of steel.
 
(2) into the other powder additives, adjust the steel grade or refining special steel. (3) the removal
 
of oxygen in the converter slag. (4) other USES, such as in strong heat resistance, oxidation
 
resistance, resistance to sulfide and corrosion resistance, etc
The characteristics of
The consumption is low. High temperature resistant coating to form strong heat resistance and oxidation
 
resistance, can achieve the minimum oxygen consumption, reduce the cost.
 
High quality: from the screening of raw materials to finished products produced by each production
 
process are in strict quality control management.
 
Low price: the advanced production equipment of production line, realized the high quality and low price
 
of the product.
specifications

 
*0 * 9.*2 * 1.2, 1.5, *0 * *0 * 1.8, *0 * 2, *0.5 * 2.5, *2 * 1, *2 * 1.2, *2 * 1.5, *2 * 1.8, *2 * *3 *
 
1, 2, *3 * 1.5 * 1.2, *3, *4 * 1 * 2, *3, *4 * 1.5 * 1.2, *4, *4 * *6 * 1, 2, *6 * *6 * *6 * 1.2, 1.3,
 
1.4, 1.5, *6 * *6 * 2, *8 * 2 * 2, *7, *9 *0 * * 2, 2, *1 * 2, *2, *7 * 2 * 2
Oxygen tube types are: 5 * 1, 5 * 1.5, 6 * 1, 6 * 1.5 * 1.2, 6, 8 * 1, 8, 8 * 1.5 * 1.2, 1.*4, 1, *0 *
 
Cleaning and preheating
Oxygen tube is widely used in buildings and industrial areas such as, how oxygen tube is clean and warm
 
up?
 
Before spray (cast) shoot processing, adopt the method of cleaning to remove oil and scale on the
 
surface of the oxygen tube, the heating furnace for preheating tube body a *0 to *0 ℃, the oxygen tube
 
surface dry state. In spray (cast) processing, such as oil free oxygen tube surface dirt, can strengthen
 
the effect of cleaning, dry the surface of the oxygen tube also is helpful for steel shot, steel grit
 
and the separation of rust and scale, make after rust removal of oxygen blowing tube surface more clean