Metallurgy Machinery: Ferroalloy Refining Ladle

الوصف

Applications: Refining ladle is a ancillary facilitiesin for LC/MC ferromanganese pruducing, it is used to recycling menganese from menganese slag and Pre-desilication for hot ferromanganese In shaking state, the silicon contained in liquid non-standard medium-carbon ferromanganese react with the manganese in manganese slag, recycling about *5 percentage points manganese from ferromanganese slag which melt into the liquid non-standard medium carbon ferromanganese , also it can reduce the silicon content in ferromanganese，it can reduce about 7 percentage points .This will not only maximize the recycling of manganese from manganese slag, but slao shorten the refining time in EAF. With refining ladle you can reduce the requirement for manganese component and purchase low-cost manganese arc , resulting in enormous economic benefits. It can recycle about *5% manganese from manganese slag which contain about *0% manganese. Refining ladle is also used for decarburization in the producing of silicon chrome（raw materials for LC ferro chrome produce）. For example: Mix the liquid silicon chrome with slag powder which is made up of low carbon ferrochrome slag and fluorite powder, and then start the refining ladle at ****0r/min rotational speed for about ****5 minutes. After treatment, the carbon content can be reduced to below 0.*2%, decarburization efficiency above *0%. Advantages: Low-, high-quality, simple operation, easy ***** ferroalloy refining in converters features easy sedimentation, less burning loss, and high ratio of recovery .Since its introduction, it has been well received by extensive customers.