الوصف
Mobile phone signal repeater ST***0
What is mobile phone signal booster?
Cell phone signal booster is also called repeater, amplifier, which
is a products designed to solve the mobile phone blind signal. As
the mobile phone signal is transmitted by electromagnetic waves to
establish a communications link, the building of the barrier, in
some tall buildings inside, the basement of some places such as
malls, restaurants, places of entertainment such as karaoke OK
sauna and massage, underground civil air defense projects, subway
stations and many other places where cell phone signals can not
reach and can not use the phone. Cell phone signal amplifier can
solve these problems in a particular place as long as the
installation of a mobile phone signal amplifier system, the entire
range of mobile phone signals can be well used, staff or customers
will get great convenience.
Application places of signal boosters
1. For large buildings such as stores, offices, school, company
headquarters
, warehouse and so on
2. For small Houses that in remote place
3. For vehicle (Car, Truck, RV…)
4. For public place, for example: Metro, Tunnel, Hotel, Pub,
Supermarket, etc
5. Gas Station, Gas Filled Station, Oil Field, Oil Depot
Main Specifications:
Working system |
CDMA |
Frequency range |
Uplink **4~**9MHz Downlink **9~**4MHz |
Gain |
UL*0±2DB
DL *5±2DB |
Output up |
UL*0DBM
DL*3DBM |
Pass band ripple |
≤1.8DB |
I/O impedance |
*0Ω |
Connector |
N connector |
Noise figure |
≤8dB |
Transmission delay |
≤0.5μs |
Power supply |
AC**0V***0V DC*2V |
Size |
**8mm***8mm**9mm |
Weight |
1kg |
Reliability |
To the GB******6 standard |
Electromagnetic compatibility |
To the ETS**0 ****4 standard |
Coverage area |
**0m² |
The full set may include (the accessories is up to your
choice)
ST repeater main unit
â—†Outdoor antenna
â—†Indoor antenna
â—†Feeder line
â—†Power Splitter (when
there are more than 2 indoor antennas)
â—†Connector
(N connector, F connector, N to F
connector etc
)
Installation guide:
Installation Steps
1 Use of mobile phones at the top of building or around the
building to check out the direction of the strongest signal
location.
2 Select the appropriate location, and put the outdoor antenna fix
to the wall or bracket.
3 Select the appropriate location of the indoor locations (this
location could be best that close to power and a well-ventilated
place, sun-proof, rain-proof) Install the Indoor Repeater, and fix
on wall or bracket.
4 Put the outdoor antenna to the "OUT DOOR" connector and tighten
it. Thus complete the outdoor antenna and Repeater's
connection.
5 After setting the suitable location of the indoor antenna and the
installation place, then fixing the antenna.
6 The indoor antenna and Repeater wiring, the indoor antenna
connect one end of the interface and on the other end connect
Repeater's "IN DOOR" port.
Adjusting illustration
A Proper adjustment of the antenna's position so that the
best communication quality and signal strength.
B Indoor antenna installed location should stay away from one
end of the outdoor antenna, so as not to interfere with each other.
(The outdoor antenna away from the indoor antenna placed above a
layer of floor is better)
C Indoor antenna should be installed above the height of 2 m
of the ceiling or the corner.
D Using the waterproof tape to wrap where has connector, so
as to avoid oxidation caused by moisture, resulting in reduced
indoor signal coverage.
بلد: |
China |
نموذج رقم: |
-
|
سعر فوب: |
100 ~ 115 / Piece (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
100 per Piece |
الحد الأدني للطلب: |
1 Piece |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
10000 Piece per Month |
نوع الدفع: |
PayPal, T/T |
مجموعة المنتج : |
- |