الوصف

 Thank you very much for your enquiry for rock blasting.
 We can take up complete contract or supply of rock cracking
chemicals  which comes in 5 kgs packets WITH ONE BOX OF *0 KGS
The usage instruction is as follows.

Drilling
       1. Drill holes using an air hammer drill and appropriate drill bit
specific to the rock type.
       2. Holes should be drilled no further than ****0cm (1 ft*2ft) apart.
Note. In reinforced concrete recommended no more than *0cm (8") apart.
       3. Recommended hole diameter *8mm**0mm (1 1/2" - 2.0") . Depth would
be ****0% of the way depending on the type of rock/material to
           be removed.


Mixing

       1. For regular safety reasons and mixing small amounts by Hand, it
is recommendable to use rubber gloves.
       2. In a bucket, combine 1.5 Liters of water to one 5kgs bag of
CRACKING MATERIAL .or pour water and CRACKING MATERIAL as a rate of 1.3
units by weight.
       3. Mix well, using a drill and paddle is recommended . If mixing
with a stick or other method, make sure powder is completely dissolved into
the water.
           Mix to the slurry.

Filling

      1. Clean holes before filling using air hose remove excess dust from
drilling.
      2. CRACKING slurry should be poured into holes within ****5 min, after
mixing. Do not fill to the top , only fill the holes about *5mm (1/2" to 1 )
          from the top.
      3. Mix well and pour into holes while agitating the hole to make sure
no air gaps are in the hole. Example; Using a piece of rod or stick to poke
holes.
      4. For Horizontal holes, a grouting pump would be most reliable to pour.

Cracking or Cutting time

                   The cracks appear in ****0 min after filling , depending
on the weather, rocks, and concrete type. the cracks become wider within
time
                   (maximum *8 hours expanding time).  NO LICENCE REQUIRED
TO USE IT

kindly INFORM  US THE QUANTITY REQUIRED BY YOU SO THAT  WE CAN DESPATCH
IMMEDIATELY.
THANKING YOU
SINCERELY
For NOVATECH INDIA