Explanation
This product is a low refractive index component liquid
silicone potting, sealing is mainly used for electronic
components, and strengthen the integrity of electronic
devices to improve the external shock and vibration
resistance. Improved internal components, insulation between
the lines, allowing the device to a small, lightweight, to
avoid components, lines directly exposed to the environment,
to improve the waterproof performance of the device. This
product has a high transmittance, good weather resistance,
heat resistance, good flow properties, and PPA, silver
coating adhesion and high strength.
Applications
High-power LED package (integrated, COB)
Use
1 Use the proportion: BQ****6A: 1
BQ****6B: 1;
(2) The A, B material was mixed to no knots, no lumps, a
uniform thin thick homogeneous state (generally requires **8
minutes), placed under vacuum deaeration, until no bubbles up
(pumping
Vacuum degassing process without heating).
3. Degassing is completed, the plastic material poured into
the filling plastic syringes. To further drive out the air
rubber, plastic material can be installed on the vacuum
syringe bubble row again.
4 Glue, should first stand or pedestal preheated **0 ℃ / 1H
above, to remove moisture inside the stand or base, in order
to avoid air bubbles during curing.
5 curing conditions: **0 ℃ / 0.**1H ***0 ℃ / 3H
Note: You can adjust according to actual situation, but you
must be thorough test compound. Packing A, B: 0.5Kg / bottle
Storage conditions Store in a cool dry and ventilated
enclosed place (storage temperature *5 ~ *5 ℃, humidity ≤
*5%), waterproof, leak-proof, sunscreen, anti-high
temperature, away from sources of ignition.
Shelf life of six months.
Precautions
Applications: 1.BQ****6A / B using stored process must ensure
that no phosphorus (P), sulfur (S), nitrogen (N), the organic
tin (Sn), water, polyurethane resin, catalyst poisons, so as
to avoid making
Obstruction and metamorphosed into a cure (for example:
cleaning plastic cup of the solution, oven residual toxic
ingredients, organic acids, etc.), as far as mixed good glue
used within 8 hours.
(2) If it is found at the bottom of a precipitate B agent
turbidity, is a normal phenomenon, shake well before using.
Safety: Be careful using this product before use and the use
of safety precautions, please note. Furthermore, it should
follow the relevant national or local government safety
regulations. (Detailed safety instructions Participation
Refer to the corresponding MSDS)
Disclaimer: This product catalog provides information
entirely based on laboratory testing and practical experience
gained understanding, we strive to accurately and believe
that a high reference value. However, as the product is often
used in conditions beyond our control, we can only guarantee
the quality of the product itself. We reserve the right to
modify without notice the specification right.