Patent Nano fuel saver do can save 20~60% fuel and reduce 75~90% air pollution for vehicle boiler

الوصف

S.N.T Super Nano Tech Series Product
（S.F.C. Super Fuel Converter）
Install Method and Advantage-
Diesel Cars, Electric Generators and Diesel/Heavy oil、Ship、Boiler
 
SNT's Super Fuel Converter (SFC) are used in traffic and industrial equipment powered by diesel fuel and heavy fuel oil. Apart from some diesel vehicles, due to structural factors, it is difficult to save fuel. General Diesel Engines, Generators, or Boilers Furnaces, Boilers without excessive wear or exhaustion of components,andthe combustion chamber is clean, the mixture ratio of air to fuel (*0: 1) is correct,byusingourSFC,driveafter 3,****6,**0 km or *****0 hours running-in, the fuel saving rate can besavedat least ****0% and the emissionwill bereduced by ****0%. Ifthe insufficient air intake, the fuel economy will be greatly reduced or not fuel save-efficient.
More fuel save-efficientwill causelowerpollutionemissions, fuelsave-efficient if not goodenough, itwill bedifficult to significantly reduce emissions. According to the previous case observation, the vast majority of the use of diesel / Heavy oil internal combustion engines have the problem of insufficientairintake, the occasion of the external combustion, most of them are oxy-combustion, and have the same situation , fuelcan not be burned completely,wheninstallourSFC, which above factorsshould affect the fuel-efficientas prime consideration.
S.F.C. Installation method:
(1) We suggest buyer can change the air filter of diesel vehicles, generators or ships equipped with diesel oil/ heavy oil as fuel, boilers and other equipment, air enter into our Super Nano Air Converter SNAC (Super Nano Air Converter-can decompose air into nano molecule for assist combustion) or install a set of high flow air filter.
 
(2) To clean carbon dioxide and stick carbon colloid formation inside of the combustion chamber of the above equipment are completely removed by using carbon dioxide removing machine or safety solvent.
 
 (3) According to the equipment of the pipe size fuel flowing, choose the appropriate model of S.F.C. , but if the fuel is heavy oil, because of excessive viscosity, it is not recommended to use S.N.T. fuel saving pill.
 
 (4) Cutting the high-pressure fuel tube, then insert the SFC into the two ends of the fuel tube according to the indication direction, then fasten it with the strong locking ring (better with the screw connector if has) after the secondary fuel filter (Fuel Filter) of the pipe, pay attention to the joint parts must be securely locked in order to ensure safety.
 
(5) S.F.C. should be fixed to the support at an angle of ****0 ° to the horizontal, with the exit (arrow) part upwards.
Fuel tends to fill full inside the fuel saver S.F.C, preventing the air from staying inside, affecting the fuel's smoothness and performance. S.F.C, and so can let SFC have enough time to decomposed fuel into Nano molecule , Please avoid that S.F.C. placed in near the high temperature and sparks next to the circuit, after installation, do check the joint parts are spilled or loose, in order to ensure safety.
 
(6) If the equipment is not fully automatic controlled by cars computer. When the SFC installation operation is completed, the fuel injection amount will be gradually reduced as the power is increased (the intake air remains unchanged) until the power is reduced and stopped up to the maximum Fuel-saving rate, if you reduce the amount of fuel and air is also reduced simultaneously when the device is not fuel save-efficient, should be changed to non-synchronous, that is should not to reduce the amount of air intake because of fuel injections reduction,air to fuel (*0: 1) is correct.Air intake must sufficient for saving more oil when fuel already turns into Nano molecule for better burning, it need more air to support.
 
S.N.A.C. (air can be decomposed into nano-molecules) advantage and installation method:
First- The advantages:
When the air passes through the SNAC, the air is decomposed into micro-Nano scale and the power is doubled. When these high-energy air enter the engine combustion chamber, they can be further decomposed to atomize the oil molecules to promote complete combustion of the fuel, and the easy installation is advantage too.
 
Second-The installation method:
(1) Open the air filter cover, take the filter, and then choose from one of *2 models SNAC combination to cover *****0% of the filter area, placed on the air filter, then fixed back into the filter box.
(2) Each time the car is serviced, when you clean the filter, and SNAC can be sprayed on at the same time with a detergent and then use the air gun to blow clean it.
 
T.S.B.D. Advantages and installation method:
First- the advantages:
T.S.B.D. In addition to the use of the cable system with hundreds of *9.*5% high purity thin copper wire composed of high conductivity degrees, the online at the first two ends of the connector on the other end of the deep plating by several rare precious metals, mineral elements
The super alloys, with the regulator, steady flow, enhance the flow of electrons, activation of the old circuit, the ignition spark enhancement *- 2 times of the effect.
 
Second- the installation method:
(1) Select the appropriate length of T.S.B.D. One end of the battery is fixed to the negative pole, the other end connected to the engine body screws.
(2) If the battery is placed in the rear trunk or at the rear of the rear cushion, the extended T.S.B.D. at the negative pole of battery, the other end passes around the bottom of the car, or the door edge is properly installed to the engine body, and continued on the top of the screw.
 
Fuel save-efficient three major elements: 1. Fuel oil to be smooth. 2. Air (adequate intake) 3. Ignition start equipment.
                                                                                         
â—Ž Note:
1. Ignition start system is normal:Check the high-voltage coil and high-voltage lines, Mars plug is not good, damaged or leakage, the clutch is skewed, wear.
 
2. The oil supply system is normal:check the tubing is twisted, blocked or damaged, resulting in oil supply is not smooth or inadequate.
 
3. Air supply system is normal:check the intake pipe is smooth, air intake sensing device is normal, the air supply filter has obstruction or failure situation.
※ (SFC allows the fuel molecules to be fully decomposed into nano molecules, that will require more air to help them for burning. It is possible to use a high-flow air filter or our SFAC Super Nano Air Converter to avoid detracting from SFC performance due to insufficient air intake ) (Because using our fuel-efficient products, it need a large amount of air to help the fuel burning completely. If the air filter has stuck too much dirt, it will block the air intake and air smooth, and the fuel-saving effect will be reduced. So we need to use the air cleaner gun to clean the air filter often. , that can make the air intake more smoothly, especially where the urban air pollution is serious).
 
4. Mix ratio of oil and air is normal:Too rich or too dilute oil can not be completely combusted, besides causing explosive force, oil is wasted and polluted by waste oil (ideal mixing ratio about 1: *0 diesel / air)