الوصف
|
Items
|
Bioaim® ***1
|
|
Relative Density
|
1.*6
|
|
Melt Point,ºC
|
******0
|
|
Melt-Flow-Index (**0oC, 2.*6 kg) ,g/*0min
|
≤5
|
|
Tensile Strength,MPa
|
≥*5
|
|
Elongation at Break,%
|
≥**0
|
|
Flexual Modulus,MPa
|
≥*0
|
|
Notched Impact Strength,KJ/m2
|
NB
|
|
Vicat soften point,oC
|
≥*0
|
|
Hardness, Shore D
|
≥*0
|
|
Ash,%
|
≤0.1
|
Material Safety Data Sheet
1. Company identification
Company: ZIBO AIMGO PLASTICS & CHEMICALS CO.,
LTD.
Address: Room ***1, Bonded Logistics Center, High-Tech Zone,
Zibo, Shandong, China.
2. Substance identification
Type: Aliphatic-Aromatic Co-polyester
Code: Bioaim® ***1
Name: Poly(Butylene Adipate
Terephthalate)
Synonym: PBAT
Application: Film
Formula:
CAS No: *********8
3. Hazard identification
Contact with molten product may cause thermal
burns.
Not cause eye, skin and respiratory contact
irritation.
No data available concerning sensitizing effects, repeated dose
toxicity and terrestrial toxicity.
4. First-aid measures
If inhaled: Remove the affected individual into fresh air and
keep the person calm. If difficulties occur, seek medical
attention.
If on skin: Areas affected by molten material should be quickly
placed under cold running water. Burns caused by molten material
require hospital treatment. Seek medical assistance for removal
of adhering material.
If in eyes: In case of contact with the eyes, rinse immediately
for at least *5 minutes with plenty of water. If irritation
develops, seek medical attention.
If swallowed: No hazards anticipated. Rinse mouth and then drink
plenty of water. If difficulties occur, seek medical
attention.
5. Fire-fighting measures
Flash point: > **0 °F, Auto ignition: **0 °C
Suitable extinguishing media: water, foam, dry extinguishing
media
Protective equipment for fire-fighting: self-contained breathing
apparatus and turn-out gear.
6. Accidental release measures
Avoid inhalation. Avoid contact with the skin, eyes and clothing.
Sources of ignition should be kept well clear.
Avoid raising dust. Ensure adequate ventilation. After
decontamination, spill area can be washed with
water.
7. Handling and storage
Keep container tightly closed and dry; store in a cool place.
Avoid extreme heat. Avoid direct sunlight. Avoid all sources of
ignition: heat, sparks, opening flame.
8. Physical and chemical properties
Density
(*0°C):
1.*6 g/cm3
Melting range:
**0
- **5 °C (DSC, *0 K/min)
Thermal decomposition: **0°C (TGA, *0
K/min)
Form: pellets
Odor: odorless
PH value: 7
Solubility in water: insoluble
9. Stability and reactivity
Avoid extreme heat. Avoid all sources of ignition: heat, sparks,
opening flame.
Substances to avoid: strong oxidizing agents, chlorinated
hydrocarbons, aromatic solvents
Possible thermal decomposition products: gases/vapors, monomers,
oxides, hydrocarbons
Corrosion to metals: No corrosive effect on
metal.
*0. Toxicological information
Non-toxic.
Based on our experience and the information available, no adverse
health effects are expected if handled as recommended with
suitable precautions for designated uses.
*1. Ecological information
According EN ****2 or ASTM D***0, It is complete biodegradable
material and can be composted and deposited in landfills. It can
be recycled and incinerated in adequate plants. At the present
state of knowledge, no negative ecological effects are
expected.
*2. Disposal considerations
Composting or incineration.
*3. Regulatory information
Complies with TSCA.
| بلد: |
China |
| نموذج رقم: |
-
|
| سعر فوب: |
3900 ~ 3950 / Ton ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
- |
| سعر الحد الأدنى للطلب: |
3900 per Ton |
| الحد الأدني للطلب: |
1 Ton |
| تفاصيل التغليف: |
600kg/bag |
| موعد التسليم: |
Qingdao |
| القدرة على التوريد: |
1000 Ton per Month |
| نوع الدفع: |
L/C, T/T |
| مجموعة المنتج : |
Bio-Plastics
|
