pipeline coating polyethylene white color with butyl adheisve tape

سعر فوب

أحصل على آخر سعر

2.4 USD / Kilogram

100 Roll Minimum Order

بلد:

China

نموذج رقم:

XUNDA T200

سعر فوب:

2.4 USD / Kilogram (قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

2.4 per Kilogram

الحد الأدني للطلب:

100 Roll

تفاصيل التغليف:

400*400*420

موعد التسليم:

4 days

القدرة على التوريد:

300 Ton per Month

نوع الدفع:

T/T, L/C

مجموعة المنتج :

XUNDA T200

الاتصال الآن

عرض كتيب

Jining Xunda Pipeline coating materials Co., Ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Mr. Spark

Chenguang Road, No. 1, Rencheng Industry District, Jining, Shandong

الاتصال الآن

مواصفات المنتج

Backing layer:polyethylene
adhesive layer:Butyl rubber
Another name:pipe wrap tape
Color:white, balck
same brand:polyken,denso,Alta
Usage:pipe anticorrosion
matched with:primer
Thickness:: 0.5mm 0.63mm 20mil 25mil
length: :600ft 400ft 200ft
width:: 800mm max 50mm min
Adhesion to primer pipe:: 25 N/cm
Usage: :pipe anticorrosion

الوصف

pipeline coating polyethylene white color with butyl adheisve tape

is systerm for corrosion protection of oil, gas, petrochemical, waste water underground and overhead pipelines.the inner layer tape shall be applied after the primer and before the outer layer tape .

pipeline coating polyethylene white color with butyl adheisve tape is with a stabilized polyethylene carrier film, coated on one sides with a permanently plastic synthetic compound on a butyl rubber base. The highly stable and supple carrier film guarantees a high degree of protection from mechanical damage.

Structure

pipeline coating polyethylene white color with butyl adheisve tape consists of two layers:

adhensive layer and film backing

A:adhensive layer: butyl rubber

B:film backing: special blend of stabilized polyethylene

Feature

Excellent adhension to pipe and itself

1:Resistant to UV

2:Can be applied over a wide temperature range

3:Good conformbility and consistant uniform thickness

4:Easily applied with no special equipment

5:Compatble with common pipe coating

6:Excellent resistant to cathodic disbonding

7:Meet ASTM D 1000 standards

8:Cold applied

Application

Prepare surfaces by eradicating all loose scale, rust or other foreign matter by grit blasting or wire brush.

The surface must be clean, dry and free of grease.

Peel back strip and apply tacky side of the tape to the surface and apply pressure.

Apply the tape spirally with sufficient tension to make it conform.

Remove interleaving as wrapping proceeds. Overlap each turn by at least 1 or 55%.

(Note: when proper surface prep is not achievable or when applying to pitted pipe, apply a thin film of Butyl Pipe Primer to all surfaces to be wrapped and allow to dry).

(Over width silicone paper prevents product contamination during site handling and storage).

Wrapping materials for underground pipes(pipe wrap tape) is used as the base

material which is coated by the liquid butyl rubber film, both of which are

pressed and compounded. The film of protective tape is thicker and higher in intensity,

color is white.

pipeline coating polyethylene white color with butyl adheisve tape will protect the pipe

and its anti-corrosion tape surface from damages.

Xunda wrap have been specially developed for high-quality, onsite corrosion protection for joints,

in cases where the pipeline has already been installed.

The material is easy, safe and quick to apply on welded joints,bends and other complicated shapes.