الوصف
Plastic Modular formwork is an easy and intuitive system of PC-ABS
formworks for building concrete walls, basements, columns, slabs,
etc., Compared with the traditional plywood or steel systems,
modular formwork is handier, average cost effective and faster to
set up, save time and labor. Modular formwork has panels of various
sizes, fastened together by fast-lock nylon handles. Due to the
several possible panel combinations and special inner and outer
corner elements, the possible wall thickness goes from 10 to 40
cm.
Handier
The biggest panel is 120x60cm, weight only 10.5kg, which can be
lift and set up by only one person easily, need no crane or other
lift equipment on the site.
The light weight of panels also make dismental and removing work
easily.
Easy operation
Different size of panels can be firmly locked by simply turn the
special handles to 90 degree. The panels have rib on the back,
which makes the system need not traditional wood blocks and
nails.
The panels have holes to fit tie rod, guarantee the strength of the
whole system.
Modularity
Modular formwork composed by different size of panels, the main
item is 120×60 panel, the size is 120x60cm, which used for the
large area of walls and slabs. There are also small size of panels
like 10×60 panel (10x60cm), 15×60 panel (15x60cm), 20×60 panel
(20x60cm), 25×60 panel (25x60cm), inner corner (20x20x60cm) and
outer corner (10x5x60cm), and so on. Due to the variety of panel
size, the system can form almost all size walls of multiple by
5cm.
Strength
The material of modular formwork is PC-ABS mixied with special
fibreglass which enable panels to hold high pressures to 133KN.
The handles are made by high strength Nylon, each panel locked by
at least 4 handls, which makes the whole system strong enough to
pour 40cm walls.
Enviromental
The system need not cut and nail due to the variety size, and
nearly need no wood, thus keep the site of construction tidy and
clean.
The material can be recycled when used out, so to minimize the
possibility of polluting enviroment.
Consequent
Concrete does not stick to plastic, thus the panels need no oil
before using, and can be cleaned simply by water after using.
The surface of finished wall which built by modular formwork is
smooth, can be left without rework.
Wall and corners
Using modular formwork, it is possible to pour up to 40cm thick
and 3 meters highstraight walls one time.
Combining with special corners and compensation panels, right angle
walls, three way T-walls and four way cross walls can be fomed
easily.
The low weight and modularity of modular formwork makes it ideal
for fence walls as it is possible to move large gangforms by
hand.
Door and windows
To make doors and windows by modular formwork is simple, by
inserting inside the formwork a wooden frame corresponding to the
size of the opening needed, and then pour the walls with doors and
windows.
Adjustable column
Adjustable column panel is a modular shuttering panel, made of high
impact resistant plastic, for reinforced concrete columns, pile
caps. The panels are engineered to interconnect or thogonally in
different positions, creating a star-shaped formwork from 20cm to
60cm.
بلد: |
China |
نموذج رقم: |
CPANE0120
|
سعر فوب: |
70 ~ 73 / Square Meter (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
70 per Square Meter |
الحد الأدني للطلب: |
100 Square Meter |
تفاصيل التغليف: |
PALLET WITH PLASTIC FILM |
موعد التسليم: |
14 DAYS |
القدرة على التوريد: |
10000 Square Meter per Month |
نوع الدفع: |
T/T, L/C |
مجموعة المنتج : |
plastic formwork
|