الوصف
Product Description
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars
*5% Fuel Save
Certificates : CE / FCC / RoHS
It works based OBD2 protocols as remaping the Cars computer ECU.
After driving **0 km road total, EcoOBD2 adjusts itself to the
car, according to the drivers habits and always keeps remaping
the ECU to save fuel lower and immission.
What does EcoOBD2 make?
According to your driving habits, EcoOBD2 makes new map in the
cars computer ECU for the vehicles lower fuel consumption. As you
driving much more KM/Mile, EcoOBD2 renews the map and adjusts
itself to match your car perfectly for more fuel saving.
What is EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2
connector of your car to decrease the fuel consumption of your
car.
When it plugged into OBD2 connector, EcoOBD2 receives the
information from the car computer ECU. With the received data
from ECU,
EcoOBD2 adjusts the boost pressure, quantity of fuel, injection
timing and pressure to decrease the fuel consumption of your
car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer
requirements. It works only within the tolerance of the
engine.
EcoOBD2 does not damage the engine and the car computer ECU or
not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the settings permanently. To turn
back to the cars original settings, just unplug EcoOBD2 from OBD2
connector.
EcoOBD2 is very easy to use
Plug EcoOBD2 into OBD2 connector of your car. And turn the
ignition on for *0 seconds. And Turn the engine on.
EcoOBD2 settings are optimal and the best for your car. Even the
parameters are different for each vehicle,
there might not be a need to make an additional
adjustment.
EcoOBD2 will recognize your vehicle and your driving habits after
around **0 km/**0 miles driving,
and then EcoOBD2 adjusts itself to match your car
perfectly.
EcoOBD2 works on the basis of changing the signal form ECU. As a
consequence, it changes the whole injection map
The main difference between EcoOBD2 Chip Tuning Box and Remapping
tuning methods is that EcoOBD2 Chip Tuning Box is easily
removable, and after unplug you go back to the factory settings.
EcoOBD2 is the cheap and safe type of tuning. Remapping is a
permanent change to your car.
This is the expensive tuning and you cannot remove it. EcoOBD2 is
equipped with the engine protection function and **0% safe for
your car engine. EcoOBD2 produced on the printed circuit board in
SMD technology. EcoOBD2 Chip Tuning Boxes are high
quality.
EcoOBD2 Economy Chip Tuning Box Installation and
Calibration
1 Pull the Car Key out from the ignition.
2 Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 Insert the key into the ignition and twist the key to the first
stage. (Do not start the car)
4 Press the reset buttom for about 5 sec. After releasing the
buttom, just wait for a while about ****4 sec. (EcoOBD2 will
communicate and establish connection with ECU)
5 Start up the engine.
6 EcoOBD2 will recognize your vehicle and your driving habits,
after around **0 km/**0 miles driving and thus EcoOBD2 will
adjust itself to match your car perfectly for more fuel
saving.
Does your car have OBD2 connector?
On-Board Diagnostics, or OBD, is a computer-based system built
into all ***6 and later light-duty vehicles and trucks, as
required by the Clean Air Act Amendments of ***0. OBD systems are
designed to monitor the performance of some of an engines major
components including those responsible for controlling
emissions.
OBD2 necessarily for cars:
Sold after January 1, ***6 in the USA
Sold after January 1, ***1 in the European Union
With diesel engine sold after January 1, ***3
Where located OBD2 connector in your car?
1 Drivers side, underneath dasboard, in the area under the
steering column,
2 Drivers side, underneath dasboard,between the driver-side door
and steering column area
3 Drivers side, underneath dasboard, between the steering column
area and the center console
4 Drivers side, dashboard instrument/gauge area, between the
steering column and center console
5 Drivers side, dashboard instrument/gauge area, between the
driver-side door and steering column
6 Center console, vertical surface left of vehicle
centerline
7 Center console, vertical surface right of vehicle centerline or
on passenger side of center console
8 Center console, horizontal surface i
| بلد: |
China |
| نموذج رقم: |
GW06000006
|
| سعر فوب: |
( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
- |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
1 Piece |
| تفاصيل التغليف: |
- |
| موعد التسليم: |
3-5days |
| القدرة على التوريد: |
- |
| نوع الدفع: |
PayPal, Western Union, T/T |
| مجموعة المنتج : |
ECU Chip Tunning
|
