Polyester reinforced SBS bituminous waterproof membrane for roof

الوصف

Polyester reinforced SBS bituminous waterproof membrane for roof

Product description:

Product category:

1. According to the base: polyester felt(PY), glass fiber mat(G), glass fiber reinforced polyester felt (PYG)
2. According to the upper surface: polyethylene film(PE), sand(S), and Mineral slates(M); Lower surface: polyethylene film(PE) and sand(S)( sand granules size does not exceed 0.6mm)
3. According to the membrane performance: I Grade and II Grade

Product Characteristics:

1. SBS waterproof membrane has high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure.
2. Resistant to high and low temperature, suitable for hot and cold regions, especially for cold regions
3. Good resistant to acid and alkali corrosion, weather resistance
4. Construction convenience, hot melt method and cold adhesive method.

1. Dimensions/roll:7.5m2,*0m2  
2. Thickness:3mm,4mm
3. Finish: Fine Sand, Mineral Slates, PE film

Applied ranges:

1. Widely used in all kinds of industrial and civil building roof, basement waterproof and seepage-proof engineering; subway, tunnel, sewage treatment plant, landfill field municipal waterproof engineering; canals, water pool, swimming pool water conservancy facilities etc.
2. Glass fiber reinforced polyester felt base membrane is suitable for single layer waterproof engineering of mechanical fixation, but require wind load test.
3. Fiberglass mat base membrane is suitable for general roof and underground waterproof engineering;
4. Exposed waterproof engineering is suitable to use SBS membrane with upper surface of insulating material mineral slates.
5.  The underground waterproof project is suitable to use the fine sand insulation surface SBS membrane.