Polyether Sealant Modified/MS Sealant for boat,automobile,yacht, By Shanghai SEPUNA Chemical Technology Co., Ltd,

Polyether Sealant Modified/MS Sealant for boat,automobile,yacht,

سعر فوب

أحصل على آخر سعر

3.53 ~ 3.25 /

3000 Piece Minimum Order

بلد:

China

نموذج رقم:

SM1353 SM1220 SM1937

سعر فوب:

3.53 ~ 3.25 / (قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

3.53

الحد الأدني للطلب:

3000 Piece

تفاصيل التغليف:

300ml/tube Hose: 600ML/sausage

موعد التسليم:

15days after receiving the payment

القدرة على التوريد:

10000000 Piece per Month

نوع الدفع:

T/T, Western Union, Money Gram

مجموعة المنتج :

Silicone adhesive and sealants

مواصفات المنتج

Other Names: PUNADE
Classification: Other Adhesives
Main Raw Material: Silicone
Brand Name: PUNADE

Curing rate (dependent onÂ state of the environm:3-5days about 13mm
curing time (dependent on state of the environment)Construc:5-35â„ƒ 60mins
Shrinkage rate : About 2% Shore A hardness
Elongation at break :550%
Elongation at break:About 50

الوصف

We supply MS sealant:low modulus,medium moludus,and high modulus.SM1220 SM1353 SM1937,they can be used for construction sealing and filling gaps,for automobile body bonding and sealing,auto glass bonding,etc.
SM1353 is a one component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a
permanent elastomer. Product description
PUNADE MS series is a silane-modified polyurethane sealant, with the advantages of polyurethane and
silicone sealants.SM1353 is manufactured in strict accordance with ISO9001/14001 Quality Assurance
System and related protection provisions.
Features
1.  Low VOC, silicone, plasticizer migration, or bubbles curing, with very little odor.
2.  Wide range of flexible bonding and durability, primer bonding-free.
3.  It can be painted, polished, and bonded and repaired in a repeated manner, but necessary surface
    requirements are not changed when substrates are re-bonded.
4.  UV resistant, anti-aging and weathering resistance, flooding resistant and mould resistant.
5.  Resistant to fresh water, sea water and usually water-based cleaning agents, and has a strong
    bearing capacity to fuel, mineral oil, vegetable oil and animal fat and crude oil,

Intolerant to concentrated organic or inorganic acid/base solution or solvent. For specific

requirements, we will provide relevant products and advice.

Dealcoholized curing, no corrosion to substrates, and substrates not polluted, in line with the

    standard for stone stain resistance.
Usage
1.  Specially used for marine wood floor filling and bonding,
2. Good adhesion to many substrates, include wood, various metal and surface treatment (painting or
   plating), glass, concrete products, mortar, ceramic materials and plastics and rubber and so on.

Suitable for industrial bonding and fixing (such as the installation of automobile windshield, and the

manufacturing of means of transportation and lift cabinets),
4. Flexible seal bonding and fixing required for medium strength and high modulus.
5. Compatibility test should be done on the actual substrates and in the environment in advance.
â—†Date Table

Chemical base	One-component modified polyurethane
Color	White, gray, black and beige
Curing mechanism	Moisture-curing
Density	About 1.4kg/L
Extrusion rate	About 600g/min
Anti-sagging	Mild liquidity
Construction temperature	5-35â„ƒ
Surface curing time (dependent on state of the environment)	60mins
Curing rate (dependent on state of the environment)	3-5days about 13mm
Shrinkage rate	About 2%
Shore A hardness	About 50
Glass transition temperature	-60â„ƒ
Tensile strength	> 2.0Mpa.
Elongation at break	> 550%
Tear strength	About 14N/mm
Interface displacement capacity (ISO11600 and JC485 standard classification)	25% (The joint displacement 100%)
elasticity modulus (ISO11600 and JC485 standard classification)	HM (high modulus)
Recommended Substrate (ISO11600 standard classification)	F+G (cement and glass)
Recommended Substrate (ISO11600 standard classification)	M+C+G+Q (metal, cement, glass and others)
Artificial Ultraviolet (uv) Light (300Wï¼Œ10000hr)	No crack, pulverization, and discoloration on the surface
Operating temperature	Long-term -40â„ƒ--+90â„ƒ 10 hours 120â„ƒ 1 hours 145â„ƒ
Shelf life (sealed storage at below 25â„ƒ)	12 months

Noticeï¼šThe product has passed below test standards

â—†Operation
1) Surface treatment
Bonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer. For details call us.
2) Construction
---Rigid packaging: cut the tube mouth.
---Flexible packaging: put glue into the glue gun and cut the closed mouth.
---In accordance with the designed adhesive strip cutting nozzle, the glue gun for manual hard tube, pneumatic piston glue gun or rubber pump equipment must be used in order to achieve satisfactory sealing effect.
---If PUNADE SM1353 will touch with polyurethane bonding glue or paint, we must wait until polyurethane is fully cured before PUNADE SM1353 can be used for jointing or bonding.
3) Trimming and finishing
Trimming and finishing must be conducted before drying the surface, and prior applicability/compatibility test on the finishing agents or lubricants must be done.
4) Cleaning
---The PUNADE SM1353 uncured can be removed from tools or equipment, with the use of a suitable solvent or PUNADE Cleaning Paste
---Once cured it can only be removed by mechanical method
--- Immediately cleaned with industrial hand cleaner and water if stick to skin
---The redundant sealant not used up can be sealed and saved, and the cured part on its surface can be removed before next use. Applicability test is needed.
5) Surface painting (when necessary)
---PUNADE SM1353 can be available for painting before and after drying the surface.
--- A compatibility test should be done before painting.
---The thickness and hardness of the paint layer may weaken the elasticity of glue, and it is possible for the paint to be cracking.
â—†Package and Storage

Package
Hard tube: 300ml; Hose: 600ML; Keg: 23L; Barrel: 195L.
Storage and transport
Shelf life (sealed storage at below 25â„ƒ): 9 months.

بلد:	China
نموذج رقم:	SM1353 SM1220 SM1937
سعر فوب:	3.53 ~ 3.25 / (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	3.53
الحد الأدني للطلب:	3000 Piece
تفاصيل التغليف:	300ml/tube Hose: 600ML/sausage
موعد التسليم:	15days after receiving the payment
القدرة على التوريد:	10000000 Piece per Month
نوع الدفع:	T/T, Western Union, Money Gram
مجموعة المنتج :	Silicone adhesive and sealants