سعر فوب
أحصل على آخر سعر800 ~ 1600 / Ton ( Negotiable )
|10 Ton Minimum Order
بلد:
China
نموذج رقم:
LDPE (low density polyethylene)
سعر فوب:
800 ~ 1600 / Ton ( Negotiable )أحصل على آخر سعر
الموقع:
China
سعر الحد الأدنى للطلب:
800 per Ton
الحد الأدني للطلب:
10 Ton
تفاصيل التغليف:
25 kg/PP bag or as customers' request.
موعد التسليم:
Within 21days after accept the payment
القدرة على التوريد:
200 Ton per Month
نوع الدفع:
Western Union, T/T
مجموعة المنتج :
الشخص الذي يمكن الاتصال به wilma-cn.annachem1.035119
No 75 Chongqing Road Innan Economic Development Area, Lanzhou, Gansu
Description:
LDPE (Polyethylene)
1.Type: Virgin&RecycledLDPE is a milky translucent waxy solid resin, non-toxic. Softening point is lower, Above it will be thaw, the hot melt connection, forming performance is good, good flexibility, impact toughness, low temperature resistance is good, but in **0°C ~ **0°C, good electrical insulation.
The physical and chemical properties:
PE material classification:
( 1): LDPE low density polyethylene, high pressure polyethylene ( 2) LLDPE: linear low density polyethylene
( 3): MDPE medium density polyethylene resin, Shuangfeng ( 4) HDPE: high density polyethylene, low pressure polyethylene
The LDPE poor mechanical strength, heat resistance, resistance to environmental stress cracking resistance, adhesion, adhesion, poor printability, subject to surface treatment, such as chemical erosion, corona treatment before it can improve its adhesion, printing.
The LDPE absorbent is very low, almost no water absorption, chemical stability good, such as acid, alkali, salt, organic solvents are more stable. On CO2, organic odor permeability, but the water vapor, air permeability. Easy burning, burning like a wax;
The LDPE in the sunlight and heat effect easy
degradation and color, from white to yellow to brown, the final was
black, and performance degradation or cracking, if adding a certain
amount of antioxidants, ultraviolet absorbers can improve
performance, in the chemical crosslinking agent or high-energy
radiation crosslinking, can provide high softening point, heat
resistance, stiffness, solvent resistance.
Specifications:
Tests
|
Value
|
Unit
|
Melt Flow Rate (MFR)
|
0.4
|
g/*0min
|
Density
|
0.**1
|
g/cm3
|
Power Ash
|
0.*1
|
%
|
Tensile Strength
|
*3.5
|
Mpa
|
Elongation At Break
|
**0
|
%
|
Izod Impact Strength
|
4
|
J/M
|
Environmental stress-cracking
|
**0
|
-
|
Impact Embrittlement temperature
|
**0
|
?
|
Packing
|
*5kg in pp bag,
*0MT/1X*0FCL
|
Tests
|
Value
|
Unit
|
Melt Flow Rate (MFR)
|
0.*4
|
g/*0min
|
Density
|
0.**9
|
g/cm3
|
Power Ash
|
0.*1
|
%
|
Tensile Strength
|
*2
|
Mpa
|
Elongation At Break
|
**0
|
%
|
Environmental stress-cracking
|
****0
|
-
|
Packing
|
*5kg in pp bag,
*0MT/1X*0'FCL
|
Tests
|
Value
|
Unit
|
Melt Flow Rate (MFR)
|
*5
|
g/*0min
|
Density
|
0.**2
|
g/cm3
|
Tensile Yield Strength
|
7
|
Mpa
|
Elongation at Break
|
*5
|
%
|
Wien Softening Point
|
*5
|
?
|
Packing
|
In *5 kg PP woven bags,
*0MT/*0’FCL
|
Tests
|
Value
|
Unit
|
Melt Flow Rate (MFR)
|
2.0±0.4
|
g/*0min
|
Density
|
**0±2
|
Kg/cm3
|
Tensile Strengthat Yield
|
8
|
Mpa ≥
|
Tensile Strengthat Break
|
*2
|
Mpa ≥
|
haze
|
*5
|
%≤
|
Packing
|
In *5 kg PP woven bags,
*0MT/*0’FCL
|
بلد: | China |
نموذج رقم: | LDPE (low density polyethylene) |
سعر فوب: | 800 ~ 1600 / Ton ( Negotiable ) أحصل على آخر سعر |
الموقع: | China |
سعر الحد الأدنى للطلب: | 800 per Ton |
الحد الأدني للطلب: | 10 Ton |
تفاصيل التغليف: | 25 kg/PP bag or as customers' request. |
موعد التسليم: | Within 21days after accept the payment |
القدرة على التوريد: | 200 Ton per Month |
نوع الدفع: | Western Union, T/T |
مجموعة المنتج : | Plasitc raw materials |