Polymer Vertical Type Rod Ram Extruder Machine Dia 4mm-20mm

الوصف

1. Characteristics of PTFE（UHMWPE）Ram Rod Extruder PFB*0

1. Through continuous improvement, the equipment is smarter, more stable and more efficient.
2. The equipment is controlled by PLC system, and operated automatically with simple operation.
3. With diverse design, the equipment can meet the different needs of users, and be customized for customers.
4. The equipment runs stably for a long time, with lower noise. And reduces costs by saving power and energy during pressure maintenance.
5. Equipment and molds are made by special technology, corrosion resistance, durable and with long service life.
6. The equipment design is simple and takes up little space.
7. Extruded products have superior performance in terms of density and tensile strength.
8. Equipped with an automatic feeding system, filling a bucket of ****0 kg, automatic feeding system can guarantee **8 hours of operation and save labor costs to a great extent.
9. PTFE ram rod extruder can continuously push rod and the rod can be cut according to the requirements.
10. Provide a complete mold system, which includes a full set of corresponding accessories, heating and sintering system, cooling system, temperature controller, bracket, etc.
11. The vertical rod extruder extrude from top to bottom. The equipment can be placed on the second floor or a platform.

1. The ground of the site is required to be level, and the site load is not less than the design requirements.
2. The operating platform needs clean space to reduce dust ingress. It is best to have ventilation ducts in the workshop to facilitate ventilation.
3. Industrial power standard **0V *0Hz 3P, voltage can be customized according to user needs.
4. The factory is equipped with power distribution cabinets, compressed air and other supporting equipment.
5. The equipment needs to be equipped with a cooling system. Two buckets / water tanks can be used with a cooling pump to recycle water resources.
6. The room temperature of the plant should be no more than *8 ° C.
7. The vertical extrusion equipment extrudes from the top to the bottom. The equipment is installed on the platform or floor with a space height of about 2.8 meters. The effective distance in the longitudinal direction of the device needs to be considered, and a sufficient height must be guaranteed under the fixed circular hole of the device to meet the requirements of the length of the extruded PTFE rod.
8. Horizontal extrusion equipment needs to consider the effective distance in the horizontal direction of the equipment, and it is necessary to ensure the length of the PTFE rod. The equipment includes a mold length of **7 meters (excluding the length of the extruded finished rod), a width of 1.2 meters, a height of 1.8 meters.