الوصف
1. Climate Condition：
Install the PV panel in the following conditions:
Ambient temperature:**0℃ - **0℃ Operating
temperature:**0℃ - **0℃ Snow Load Capacity: below ***0Pa Wind
Load Capacity: below ***0Pa Water resistance: don’t install the PV
panel in a location where it would be immersed in water or
continually exposed to water from sprinkler or fountain, etc.
Corrosion resistance: except for corrosive salt area and sulfurous
area.
2. Orientation:
Install the PV panels facing south (in Northern Hemisphere) or to
north (in Southern Hemisphere).Incorrect orientation will result
in loss of power output.
PV panels connected in series should be installed at same
orientation and angle. Different orientation or angle may cause
loss of output power due to the different radiation on the
panels.
Install the PV panels as free as possible from shading. Shading
causes loss of output, even though the bypass diodes fitted in PV
panels by manufactory can minimize such loss
3. Mounting and notes:
Fasten the PV panels to the shelves with spring washers and flat
washers.
Put the PV panels in a proper grounding way, which should be
according to the mounting structures and environment.
Note: Do not install the PV panels near naked flame or flammable
materials.
Mounting structure should withstand environment. Select proper
material and corrosive treatment.
Use appropriate methods to mount PV panels. Avoid any damages
from falling.
Do not disassemble, bend, walk on the panels, please do not
impact the panels by sharp objects.
4. Caution
The PV panel has a pair of waterproof connectors (positive and
negative). For the connection in series, please connect the
positive (+) connector of 1st PV panel to the negative (-)
connector of the next panel.
Connect the output cables with load equipments correctly.
Please do not connect the panel’s positive connector to its
negative one directly. It will be short circuit.
Make sure there is no gap between the connector and insulator.
If the gap exists, a fire or an electrical shock may occur.
Check the mounting structure. Tighten the loosen components
again, if required.
Check the connections of cables, grounding cable connectors
frequently.
Clean the face of the panels regularly with soft cloth
frequently.
Replacing panels should be the same kind and type
Don’t touch live parts of cables and connectors. Use appropriate
safety equipments when touching them.(Insulated tools, insulating
gloves, etc)
Covert the front surface of PV panel by an opaque cloth or other
materials when repairing under sunlight, the PV panels will
generate high voltage and it will be dangerous.
The quality assurance time of the PV panel is 3 years. The
power declines not exceed *0% in *0 years and *0% in *5 years.
| بلد: |
China |
| نموذج رقم: |
Polysilicon battery components
|
| سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
- |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
- |
| تفاصيل التغليف: |
- |
| موعد التسليم: |
- |
| القدرة على التوريد: |
- |
| نوع الدفع: |
- |
| مجموعة المنتج : |
- |
