الوصف

Portable diesel generator use moving-iron moving-coil analog panel meter

I.Usage and application:
This series of instruments directly simulates the display of electrical measurement indications, measure DC current, voltage, AC current, voltage, frequency, power factor, phase sequence, power, synchronization indication and other non-electricity measurements. It is widely used in various railways, DC transmission and distribution systems, power control panels and other electrical equipment for maritime ships, rail transit, chemical explosion-proof, low-voltage complete sets of equipment, construction equipment, generator sets, machinery and equipment industries. Acting on electrical measurement and non-electrical measurement, it is a general-purpose medium and high-grade instrument suitable for general requirements of environmental conditions.Explosion-proof chemical use analyzer testing needle pointer analog panel rack-mount meter

II.Standards and certifications:
The analog panel meter is in accordance with GB/T********8, the digital display instrument is produced according to GB/T*********8 standard, and its safety performance is produced according to GB***3 and IEC****0 standards.The scale and pointer design of the dial conforms to the German DIN****0 and DIN****2 standards. The shape and opening size of the meter are produced in accordance with GB/T***2 and IEC****4 standards.

III.Analog panel meter shells:
The CT series base is made of flame retardant TBT plastic with a Vicat temperature of **0 °C. The outer casing is made of flame-retardant ABS plastic with a Vicat temperature of *5 °C.Explosion-proof chemical use analyzer testing needle pointer analog panel rack-mount meter

IV.Temperature-induced change:
The reference temperature is *3 °C ± 2 °C, *3 °C ~ *3 °C and *3 °C ~ *3 °C temperature range, the temperature change allowable change is not greater than ± **0% of the grade index.

V.Installation location and installation method:
Unless otherwise specified, the meter is usually installed in a vertical position. Other installation locations such as: horizontal installation, tilt installation can be made according to customer requirements. The accuracy level of the response is only valid for the specified installation location. The meter is divided into a right angle of *0 ° and a wide angle of **0 °, two angles of indication.Explosion-proof chemical use analyzer testing needle pointer analog panel rack-mount meter

VI.Resistance to vibration and shock:
Anti-vibration: in accordance with IEC********6 standard; sweep frequency range: *******0Hz; displacement amplitude: ±0.*5mm, ±0.3mm. Sweep cycle number: 5 times; sweep rate: *0ct/min; maximum acceleration: **7m/s2 (*5g), **0m/s2 (*0g). Acceleration effective value: 6.*6g; Vibration time: *5min. Anti-mechanical impact, in line with IEC*********7 standard.

VII.Accuracy level:
CT series pointer meter: AC and DC voltmeter and ammeter are 1.5 or 2.5, the power meter is 2.5, the frequency meter is 2.5, and the power factor meter is 2.5.

VIII.Overload current meter:
The overload multiplier is conventionally 1x and 2x overload multiples, which can be customized to 1x, 2x, 3x, etc. by the user. Its role is to indicate the approximate value of the instantaneous overload current, such as the starting current when the motor starts.

IX.External current shunt:
The DC current meter has a shunt voltage drop specification of **0mV, **0mV, *5mV, *0mV and *0mV, which can be customized by users. The wire resistance of the meter and the shunt is required to be within *5~*5mΩ to ensure the accuracy of the meter.Explosion-proof chemical use analyzer testing needle pointer analog panel rack-mount meter

X.Surface dial:
Surface dial: Made of aluminum alloy, white paint, black ink or laser print. The dial can be customized according to the customer's sample (multiple color overprinting can be customized). The luminous table dial uses a PC board.

XI.Zero regulator aspect:
Except for the mechanical zero reading instrument, all other instruments have a front zero adjuster for adjusting the mechanical zero position of the instrument.

XII.The main technical parameters：