Advantage
Self-illuminated ,just a little air can generate sufficient power,superior brightness
can be used without connecting circuit
push cartridge
triple  sprays
**5℃Autoclavable
Technical deta
Air pressure:0.**0.3mpa
Rotation speed:**0,******0,**0R.P.M.rpm
Bur applicable:1.**5~1.**0mm(ISO*****1)
Noise sound:≤*0db
clan and lubricate
air motor:load the pipe from motor ,For example,drip some lubrication into the air pipe at the botton
lubricate it after every use
straight hnapiece:turn the spray head to the mouthof lubrication,when unloading the bur,put the spray head to the handpiece and ensure that the head of hindpiece show sign of oil
Don`t  invert oil tin when using lubrication
Contra angle handpiece
loosen the winding part of SH,take the conducting gear out,Lubricate the conduction part,screw the clip when lubricating the heed of handpiece,use lubrication after treatment or before disinfection,
Product introduction
*special appearance designed,cooling syeterm inside.Big clamp power,push wrenth
*Head changerable,expand the use function of angle handpiece
*suit high speed bur,prophy cup
*dismounnting easily,fix easily
*convenice switch working speed and two directional
*when you open the water spray switch ,and you can cooling handpiece
*suit any kinds of brand of international handpiece
*Inner channel :without pipe,without waier mass,and autoclaving whole body

Ways of loading and unloding burs
*Straight handpiece:when unloding the bur ,please turn the stuck,until you hear a sound.And loading the bur,you turn the stuck,to the oppsite side.When you hear a sound,The bur has been fixed
*Contra angle handpiece:screw the clip and put the botton of bur to the axle center,then turn the clip to the original place,unloading  the bur.screw the clip and take the bur out
Cautions 
Don`t use damaged or winding burs,the damaged or winding burs will cause accident if use.
Burs are hard to pull out if the gully part has damaged.
Please keep the clamping part clean,if it was stained,the cartridge will shock or the strength of clamping part will waeken.
Please fix the burs or the bearing will be damaged at early stage.Don`t use motor when the clip is  loose or burs are not on.
Please install the burs or standard stick even not in usage.
warranting time:
half year for bearing
one year for light and main body
optional configuration
   two holes/four holes
    torque head/standard head
    A bearing/A+bearing
     push /wrench