PVC and Aluminum Cutting Machines:

الوصف

Machine Code: H***0 Language Support: Turkish, English, Russian, Farsi, Polonian Length: ***0 mm Width: ***0 mm Height: ***0 mm Weight: Air Pressure : **8 Bar Operating Voltage : 3 Phaze, **0 V, *0 Hz AC Motor: 3 Phaze, 1.5 Hp Servo Motor: 1 Phaze, **0 W, *0 Hz Total Power: ***0 W PLC: Full Otomatic PLC controlled HMI: ****0 Colour operator panel (Touch pad) Reset: Resets itself automatically at each opening. Machine can be reset at any time. PVC Profile Cuttingi: Can be Done Aluminum Profile Cutting:Can be Done. Cooler System: Exist. For cutting aluminum there is saw oiling system Counting profile piece for cutting: Exist Min Profile Cutting Measure:**5 mm Max Profile Cutting Measure:***0 mm Min Angle Cutting Value:0 Degrees (0 degrees = *0 degrees) Min Profile Progress Value:1 mm (1 mm can be moved step be step) Max Angle Cutting Value: *5 Degrees Min Angle Progress Value: 0.1 Degrees (0.1 degrees can turn step by step) One Head Mode: Exist Cutting Time Adjustment: Exist. Ä°t Can be Ajusted by Operator. Error Status Notification: Exist. Ä°t can tell the problem and hot it can be solved Safety: Employee and Machine safety at Maximum Value. o Single head and dual head mode can be executed. o Profile cutting angles 0 (*0 degrees) and *5 degrees in the desired value can be set. For example, 0, 0.1, 0.2, ***** *0.5, *2.1, *2.2, *****... *4.5, *4.6, *4.7 *****. *5 degrees. o Angle movement occurs automatically through Servo Motor. o In terms of deviation value 0 (zero), is no. The exact value of the desired angle can be captured. o It is very fast and can reach the greatest angle to a value of 2 sec. o After a long process does not need to reset the machine. o The first landing on the machine automatically resets itself. o Profile is carried out through a length-servo motor. Only through the touch panel to enter the profile values is sufficient. Automatically advances to the desired length of the moving head and deviation 0 (zero), is no. o Will reach 4 meters in 6 seconds. Security in terms of speed is reduced. o Progress can be made in the length of 1 millimeter profile. For example, ***0 mm, ***1 mm, ***2 mm, etc. .. o And moving the head to turn in terms of ramps are available. The first development is slow and stop. Thus, the vibration of machines and mechanical life was extended for expenses. o Cause and solution to all of the machine error tells how to do. o The machine will not be disabled for possible errors. Working by the slowdown continues. The error is resolved automatically by the former speed is reached. Thus, the user does not prevent the flow of business. o Including the *5, **0 color touch-panel interface (HMI) is used. Visual and user-friendly software interface. o PLC is used as the control unit. o It is very easy to use. o Machine interface, English, Russian, Persian and Polish language support. o Percent are between the Help menu. o Time to start cutting the Testerele between ***0 seconds can be set. o Maintenance other than cleaning and lubrication is required. o It has advanced user guide.