QIANGLI PET Spin finish oil PET three-dimensional polyester staple fiber oil agent QL-4038

الوصف

Instruction: Adjust the concentration of the configured oil according to the production equipment, process conditions and target OPU.Silicone-free fiber: The target OPU is 0.***0.*5%.Before spinning with silicon fiber: use concentration 0.**0.3%;after spinning, it is recommended not to add direct water or add a small amount of silicone oil

Dosage calculation:The amount of oil used = target blended amount of oil X target concentration/solid contentThe amount of water used = the target allocation amount of oil agent-the amount of oil agent used

Example:QL****8 target concentration: 1%, deployment amount: ***0LiterQL****8 usage=***0X1%/*0% = *5 kgWater = ******5 = **5 Liter

Attention
1) Water quality requirements: conductivity below *0us/cm, hardness below 3mg/L (with CaCO3), pH 6.**8.0.
2) This oil is used for the production of three-dimensional fibers. Please test the suitability before using this oil for other purposes.
3) All chemicals may have adverse effects on the environment and human body. Our company's products are a mixture of chemicals. Therefore, all units that produce and use chemical substances, including our company, should take prepayment measures to prevent environmental pollution and occupational health risks in accordance with environmental protection and occupational health requirements. Pay attention to site ventilation, wear protective equipment, waste water, waste disposal, etc., refer to the product MSDS for details.
4) This oil will become turbid or freeze when it is below 0℃. It will be used after heating to *0~*0℃ to dissolve completely before use, and the quality will not be affected.
5) This product has a shelf life of 6 months, avoid direct sunlight, and store it in a sealed room (****0°C).