Red Dot Sight

الوصف

Now, you own the smallest and versatile sight in the world. The amazing features of our RDP-II Mini Sight include: Compact tubeless design and small size. Low weight without sacrificing performance. Sophisticated optical system with high-quality imaging. Suitable for pistols, short barrel and large caliber guns. Easy mounting with you own optional mount adapter Large field of view due to its low magnification Parallax is free at *0 yards. BATTERY RDP- II Mini Sight is powered by one 3V lithium battery (CR***2 or equivalent). Insert the battery cavity on the underside of the housing so that the battery label identifying the positive pole is visible. For battery replacement, take out the exhausted battery by placing the Allen key in the notch located on the right-hand side as see from the bottom. POWER-SAVING The device does not contain a separate ON/OFF switch. To operate the electronic circuit in the power-saving mode, attach the cover. You may also store the device in a lightproof box to achieve the same power-saving effect thus allowing operation over a longer period. MOUNTING Mounting the sight requires a separate mount adapter for your respective gun. The underside of the sight housing contains flat bores for the accommodation of alignment pins providing defined position. Using the hexagon socket-head screws and the Allen key provided fasten the sight on the mount adapter. Then, tighten the mount adapter on the gun. ELEVATION AND WINDAGE ADJUSTMENT The sight contains separate controls for elevation and windage adjustment. To adjust the sight, turn the slotted screws using the provided adjusting wrench with attached scale and the screwdriver. Before every adjustment of elevation or windage, turn the thrust and clamp screws on the rear side of the sight to make sure to loosen the lock of the adjustment mechanism to avoid damage to it.