الوصف
Main
Functions:
-Peak Hold: Automatically
search the peak wave inside the gate and hold it on the display
-Equivalent diameter calculation: find out the peak echo and
calculate its equivalent diameter
-Rectification: Full-wave, negative half-wave, positive half-wave
and RF mode
-Monitor gates: 2 independent gates
in color bar mode, start and width variable over the entire sound
path range
-Alarm: Alarm signal via LED and
connectable internal horn. Alarm mode of positive logic, negative
logic or DAC
-Zoom: Expands A-scan display area
for increased screen resolution.
-Magnify: Expands area within the
selected gate over the entire display range for increased A-scan
resolution.
-Auto calibration: Measurement and
setting of sound velocity and probe delay using two known
calibration echoes (*-point calibration)
-Data memory: Maximum **2 datasets
store instrument setups or reports including operation parameters
plus A-scan, the stored datasets can be easily previewed, recalled
and exported to a computer for edit and printing.
-DAC / TCG: DAC (Distance Amplitude
Curves) or TCG (Time Corrected Gain) with a maximum of *6 reference
echoes, 4 other curves can be displayed with variable dB intervals.
The dB difference between the echo and the recorded DAC curve is
measured through gate A.
-JIS DAC / TCG: JIS DAC (Distance
Amplitude Curves) with a maximum of *6 reference echoes, 4 other
curves can be displayed with variable dB intervals, and 2 other
curves can be displayed with constant dB intervals. The dB
difference between the echo and the selected DAC curve is measured
through gate A. The flaw class is evaluated according to JIS
Z********2.
-AWS D1.1: Provides a dynamic
reflector indication rating for various AWS weld inspection
applications. This allows more efficient inspections by eliminating
manual calculations.
-DGS: DGS curves for single-element
and dual-element probes and for all materials, sound attenuation
and transfer loss correction, 4 other curves can be displayed with
variable dB intervals. Backwall, side drilled hole, flat bottom
hole type of the reference reflector are used. Equivalent reflector
size, dB difference or height difference is evaluated
simultaneously.
-Time of Flight mode: Peak, Flank
and J-Flank.
-Auto-freeze function: On hot
surfaces you use auto-freeze function, minimizing the probes
contact time.
-Measure under freeze status: Under
freeze status you still can move gate to measure the echoes to get
readings.
-B-SCAN: Manual b-scan as an
auxiliary tool.
بلد: |
China |
نموذج رقم: |
sonostar
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
- |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
- |
نوع الدفع: |
- |
مجموعة المنتج : |
- |