Sandblasting Glass Beads

الوصف

1) Product Introduction
Glass bead for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds
with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. 
2)  Product Specification 
Main products specification for sandblasting according to following table:

No.	Diameter(um)	Corresponding sieve size
1	******5	****0
2	******0	****0
3	******0	*****0
4	******5	******0
5	*****5	******0
6	****5	******5

You can choose different size glass bead between *5um***0um according to different function.
 High Strength Glass Bead (for Blasting)
With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing.
Other purposes of the products are as follows:
1. Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion.
2. Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine
    turbo, vane, shaft, undercarriage, diversified springs and gears, etc.
3. Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum      soldering
4. Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical
instruments and automobile parts
5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair
6. Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening
aggrandizement and polishing of textile machinery parts.
 High Strength Glass Beads for blasting

Nominal Diameter (*0%)  XIAGUANG Metal Finishing Beads
Designation	US Sieve	Inches Max	Inches Min	Microns Max	Microns Min	Min % Round
A	****0	.***1	.***4	**0	**0	*5
AAA	****5	.***8	.***9	**0	**5	*5
B	****0	.***4	.***5	**0	**5	*5
C	****0	.***5	.***8	**5	**0	*5
AA	****0	.***5	.***3	**5	**2	*0
D	****0	.***7	.***3	**0	**2	*5
AB	****0	.***7	.***0	**0	**0	*0
AC	*****0	.***8	.***9	**0	**5	*0
AD	*****0	.***3	.***1	**2	**6	*0
AE	******0	.***9	.***5	**0	*0	*5
AG	******0	.***9	.***1	**5	*3	*5
AH	******5	.***5	.***7	*0	*5	*5

 
 
 

Nominal Diameter MIL-PRF****4
Designation	US Sieve	Inches Max	Inches Min	Microns Max	Microns Min	Min % Round
3	****0	.***1	.***4	**0	**0	*5
4	****0	.***4	.***5	**0	**5	*0
5	****0	.***5	.***7	**5	**0	*0
6	****0	.***7	.***3	**0	**2	*0
7	****0	.***8	.***0	**0	**0	*0
8	*****0	.***3	.***9	**2	**0	*0
9	*****0	.***0	.***9	**0	**5	*0
*0	******0	.***9	.***5	**0	*0	*0
*1	******0	.***9	.***9	**5	*5	*0
*2	******0	.***1	.***5	**6	*3	*0
*3	******5	.***5	.***7	*0	*5	*5

 3) Technical references 
Appearance: Clean and transparent, no visible bubbles and impurity.
Density:2.**2.6g/cm3
Hardness:**7(Moh's)
Spherical beads:≥*5%
SiO2 content:>*2%
 
4) Package
1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic
woven bag to prevent leak or damp. The net weight of each bag is *5±0.2kg.
2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is
paper-plastic compound bag to prevent leak or damp. The net weight of each is *5±0.2kg.
3.According to clients' requirement
.

بلد:	China
نموذج رقم:	0.037-0.088/170-400
سعر فوب:	0 ~ 1 ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	China
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	1 Ton
تفاصيل التغليف:	25±0.2kg
موعد التسليم:	-
القدرة على التوريد:	30000 Ton per Month
نوع الدفع:	T/T, L/C, D/P
مجموعة المنتج :	-