Shock Tube for Cast Blasting By Jolly Star International Limited,

Shock Tube for Cast Blasting

سعر فوب

أحصل على آخر سعر

( Negotiable )

200000 Meter Minimum Order

بلد:

Hong Kong

نموذج رقم:

سعر فوب:

( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

الحد الأدني للطلب:

200000 Meter

تفاصيل التغليف:

carton

موعد التسليم:

15~30 working days after payment

القدرة على التوريد:

2000000 Meter per Month

نوع الدفع:

مجموعة المنتج :

Shock Tube

مواصفات المنتج

outer diameter:2.8mm to 3.2mm
tolerance:below or above 0.15mm
detonation velocity:more than 1600m/s
detonation sensitivity:one No.8 detonator detonates 20 shock tube in -40Ãƒ&i
seismic performance:explosion formally after 5 minutes vibration
storage:dry, ventilated, fire and heat prevention warehouse

الوصف

Shock Tube for Cast Blasting

1. Performance of shock tube for cast blasting
(1.)detonation velocity: the detonation velocity should not be less than ***0 m/s when shock tube is put in temperature of *0 â„ƒ±*0 â„ƒ, and the detonation velocity range of same batch should be not more than **0 m/s.
(2.)detonation sensitivity: in - *0 â„ƒ to *0 â„ƒ temperature range, one No.8 industrial detonator should fully detonate *0 detonation shock tube with detonating pieces.
(3.)detonation propagation reliability: in temperature of *0 â„ƒ±*0 â„ƒ, it should explode normally without broken the initiating side wall.
(4.)seismic performance: after 5 min vibration on the vibration test machine, it should explode formally without broken the initiating side wall.
(5.)tensile properties: when you take mechanical tensile test, the shock tube should not be snapped.
Table 1 shock tube tensile property performance requirements

Condition	Common shock tube	High strength shock tube
Test temperature â„ƒ	*0±5	*0±5	*0±5
Sustain tension N	≥8.0	≥**6	≥*8.8
Duration min	1

2. Appearance of shock tube for cast blasting
(1.)appearance: there should not be broken hole, obvious lump, flake and embedded impurities on the shock tube wall; Outside surface of shock tube should have no apparent stuck explosive, discontinuous explosive or mechanical impurities.
(2.)outer diameter: 2.8 mm to 3.2 mm, toleranceï¼š+ / - 0.*5 mm. other outside diameter specification is also allowed after negotiation.

3. Application and Types ofshock tube for cast blasting
This product is manufactured according to standard WJ/T********4, is mainly used to assembly detonating tube detonator. It has advantages of resisting stray current, and lightning induction. Models: DBGP (DBG represents shock tube; P means normal type); DBGG (DBG represents shock tube; G high strength type).

4. Application notice of shock tube for cast blasting
(1.)when you use the shock tube, open the package, cut it according to your need of the length and the number, following by inserting the finished shock tube into connecting pieces or connection elements with application requirements, and finish all the process by fixing or sealing it.
(2.)this product can be detonated by special primer, or No.8 shock tube detonator or electric detonator detonating.
(3.)Shock tube with original packaging opened should be used in time, while those not to be used temporarily should be sealed at ends or stored in a dry place, to prevent moisture absorption. It is strictly prohibited to be stored for a long time after opening the packaging.

5. Transportation storage and shelf of shock tube for cast blasting
(1) during transportation, this product transportation should not be exposure in sun or rain, never put together with the inflammable.
(2) this product should be stored in dry and ventilated warehouse without direct sunlight or heat. Keep it from fire source and power supply or sun exposure for long time.
(3) its shelf life can be three years since manufacture date, as long as it is kept in original packaging and stored in ventilated, dry, fire prevention warehouse.

JSI will never disappoint you once you show your interest in our products or production line.

Look forward to your reply.

بلد:	Hong Kong
نموذج رقم:	-
سعر فوب:	( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	200000 Meter
تفاصيل التغليف:	carton
موعد التسليم:	15~30 working days after payment
القدرة على التوريد:	2000000 Meter per Month
نوع الدفع:	-
مجموعة المنتج :	Shock Tube