الوصف
Product Features：
High-strength & High-elasticity
Polyurethane Single-component Waterproof Coating (
Environment-friendly) Is flexible waterproof coating with
isocyanate and Polyether polyol as principal raw material plus
some additives and fillers by
polyaddition reaction.
By coating it on the base and
through the polyurethane prepolymerization reaction between NCO
Terminal group and the moisture in the air, it form into a layer of
rubber waterproof film on the base surface, which are toughened,
flexible, seamless.
Main features
1.It is safe and environment-friendly product without solvent or
pollutants. And it has approved tests by state related testing
bodies so it is applicable directly to dinking waterproof
works.
2.As mono-component product, it is easier to handle. And coating
application is simple.
3.Compose of pure polyurethane, the
coating film is featured with rubber's properties. High-elasticity,
high-strength, high-extensibility and high adhesion.
4.It is applicable to heavy-film
coating, and the film has high compatibility without pinholes
or bubbles.
5.The film is generated by chemical
reaction, featured with water-resistance, corrosion
resistance, fungus resistance.
6.It is featured with good
physical and mechanical properties ,high resilience, anti-fatigue,
aging resistance. Its tensile strength reaches as high as 3Mpa with
elongation at break **0%.
7.Good weather ability makes it
adaptable to drastic changes of weather regardless of hot or
cold.
8.Water-curing Mechanism make the
scope of its application wider.
Construction Points
1.Base-treatment:it is
required to be firm, leveled, clean, and dry.
2.partial treatment: internal and
external corners should be shaped arch, the joints between pipes,
walls and plates should be filled with this product. If necessary,
non-woven fabric or fiberglass mesh fabric should be added to these
joints. After this, coating-application of large-area can be
carried out.
3.Application of coating: coat
the base several times(**3times suggested),the direction coating of
different times should be perpendicular. Another time of coating
should be not carried out until the previous coating is too dry to
stick to hands.
4.Vertical-face Treatment of walls
:after painting the last time of coating, sand should be scattered
before it is solidified.
5. Construction of external layer:
after the coating is solidified completely(about *8 hours), conduct
the construction of external layer.
6. Suggested Quantity: Film
Thickness:1MM, Coating Dosage:1.**1.*5kg/sqm.
Scope of
Application
1.Its applicable to waterproof and
moisture works of roofing, external walls, basements, balconies
,kitchens and lavatories .
2.it is suitable for special
buildings like granaries, civil air defense works, bridge
projects.
Product
Specification:
|
Type
|
Single component
Waterproof Coating
|
|
|
Material
|
Isocyanate and
Polyether
|
|
Thickness
|
1.0mm*3.0mm
|
|
Density
|
1.**1.5Kg/sqm while thickenss
is1mm.
|
|
Usage
|
basements, kitchen, lavatories,
Balconies, roofing, underground tunnels, bridge projects
etc.
|
|
Application Method
|
Brush
|
|
Packing
|
Plastic Barrel,
Pallet
|
|
Loading in Container
|
TBA
|
|
Colors
|
Customized
|
|
Enclosure
|
NONE
|
| بلد: |
China |
| نموذج رقم: |
Polyurethane
|
| سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
China |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
3 Ton |
| تفاصيل التغليف: |
25kg/barrel |
| موعد التسليم: |
10days |
| القدرة على التوريد: |
3 Ton per Day |
| نوع الدفع: |
T/T, L/C |
| مجموعة المنتج : |
- |
