SL***0H Automatic platen
die-cutting and creasing machine is a key equipment for
die-cutting, creasing and cold embossing various packing and
decorating products such as cartons , paper boxes and trade mark
labels .Its professional high-precision indexing mechanism ,thin
sheets reducer , air clutch , pneumatic sampling device and high
speed feeding system ensure smooth feeding and accurate registering
.High strength gripper bar , front and back register device ,side
register device enable its high die-cutting precision .Original
delivery device makes delivery smoothly and orderly.
The **0×**0mm format is especially suitable for processing four
cigarette boxes at the same plate.
Computer and man-machine interface show all the working state and
troubleshooting methods. Thus complete automation is
achieved.
Key parts, controlling system, main chains and fastening pieces are
imported. Their reasonable design and fine setup guarantee the high
quality of the products.
For this model, we have CE version (SL***0M) for
option.
Standard Features of Each
Section
1).
Feeder:
Stream fed top feed suction unit with a Max speed of
***0 Sheets per hour.
Pre-loading and secondary hoist system to allow
continual running during pile changes.
Feeder table will accept standard pallet or pre-loading
unit.
Photo electric sensor protecting foot trap point at
feeder table lower position. (equipped on CE version)
Adjustable air blow enabling efficient sheet separation
on the full range of raw materials.
Both push and pull side lays on both the near and off
side of the
machine.
Both front lays and side lays fitted with electronic
detection to prevent registration errors of badly position
sheets.
Double-sheet detection device fitted on the lay
board.
High specification Japanese
Nitta feeder belts for maximum stability during sheet
transfer.
Electronically controlled feeder pump, ensuring
accurately fed sheets to the front lays.
High efficiency/ low maintenance vacuum pump. (Becker
pump is for option)
Speed reduction device slow down the speed of conveying
paper before arriving at front lays, reducing rebound when paper
reach the front lays.
2).Press
Section:
Fully adjustable multiple front lay with electronic
detection device to prevent registration errors.
Standard cutting rule height. (*3.*0mm)
7mm thick high Rockwell hardened steel plates.
(optional)
Or 5mm thick hardened steel plate combined with a 2mm
hard or soft plate facility to allow matrix to be saved on
regularly run products.
High specification, heat treated steel drive Worm and
bronze Wheel main drive. Toggle action die cutting movement.
Photoelectric sheet detection at every stage of the
sheet transfer throughout the machine.
Standard 2x cutting chases complete with hardened steel
chase backing plates (Centerline designs included as
required).
Gearbox lubrication chiller unit that ensures optimum
bearing temperatures at high speed production.
Lightweight aluminum alloy gripper bars complete with
pinch grippers.
Japanese high strength extended pitch gripper bar
chain.
High precision indexing cambox drive for high precision
and high speed gripper movement.
Imported high precision synchro drive belt and
pulleys.
European Pneumatic clutch and brake
unit.
1 set of gripper bar as spare parts
3.) Delivery
Section:
Delivery front and side jogging, to ensure a neat stack
on the delivery table pallet.
A sheet sampling system that allows a sheet to be
easily removed during production to check cutting and registration
to print.
Tab inserting unit to enable delivered product to be
removed in accurate batches. (optional extra)
Quick pile change / non-stop running delivery
facility.
Involution photoelectric sensor to prevent delivery
pallet from going too high and paper rolling up
Photo electric sensor protecting foot trap point at
delivery table lower position. (equipped on CE version)
4.)
Electrical:
Main machine is controlled by Mitsubishi PLC controller
easily accessed and repaired in Europe.
Main motor speed control inverter manufactured by
Yaskawa Japan.
Machine control encoders and programmable cam
positioner Manufactured by Omron Japan.
Interlocking type guard switches used on all machine
guards in conjunction with safety relay.
5.)Lubrication System
·Import automatic oil pump lubrication system
·High-powered oil chiller
·American Bijur automatic driving chains intermittent
lubrication system
·Brass oil pipe
·Janpan SMC gas circuit system
Parameters
|
Max.
sheet
size |
**0×**0mm |
Min. sheet
size |
**0×**0mm |
|
Max. die cutting
size |
**0×**0mm |
Min. front margin |
5mm |
|
Die cutting Precision |
±0.1mm |
Max. die cutting
pressure |
**0T |
|
Paper specification |
*******0 g/m2 |
Corrugated board |
≤2mm |
|
Max. speed |
***0S/H |
Max. height of feeding pile |
***0mm |
|
Total power |
*3KW |
Max. height of delivery pile |
***0mm |
|
Total
weight |
*0T |
Overall
size(L×W×H) |
***0×***0×***0mm |
Remark: overall dimension with
preloading unit and pedal is ***0X***0X***0mm.
