solar charge controller with 2 output terminals, 12/24v, 10A,5A

الوصف

EPDC*5/*0 SOLAR CONTROLLER FOR SOLAR SYSTEM WITH AUTOMATIC LIGHTING CONTROL AND TIMER FUNCTIONS EPSOLAR’s high quality and reliability is now available in a low cost solar controller. The EPDC*2L combines EPRC design with two output terminals. EPDC controller is designed with a microcontroller for automatic lighting control functions. THE TECHNOLOGY PROVIDES: Proven reliability Precise lighting control PWM battery charging FOUR VERSIONS AVAILABLE: *2 Volt: 5 and *0 amp ratings *4 Volt: 5 and *0 amp ratings OPERATIONS: Digital LED display shows the *6 lighting options(by switch with 5 seconds ) Number display, from 0 to 7, DC output for load 1. Number display, from 0. to 7. DC output for load 2. Digital LED stop flash to confirm correct switch selection. *0 minutes delay to make sure its real dark. FEATURES: Microcontroller digital accuracy Fully automatic operation *6 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all *2/*4 Vdc lamps Suitable for Seal lead acid battery Temperature compensation TECHNICAL INFORMATION *2Volt *4Volt Rated solar 5/*0A 5/*0A Rated load 5/*0A 5/*0A *5% Current overload 1 min. 5 min. Regulation voltage *4.4 V *8.8 V Load disconnect *1.*8V *2.*5 V Load reconnect *2.*8V *5.*0 V Temp Comp.(mV/&#***1;) **0 **0 Type of Charging: series PWM Self-consumption: 6mA maximum 4 stages Bulk,PWM,Boost and Float Dimension: **0x*0.5mm Electronic protections: short circuit and over current Terminals: for wire sizes to 2.5mm2 -solar and load Weight: **0g Reverse polarity-solar,load & battery Temperature: **5 to **5 Reverse current at night Humidity: **0% non-condensing High voltage-load Enclosure: IP*2 Lightning-solar, load, battery Case: ABS Tropicalization: circuit board-conformal coated Compliance: CE world Bank Terminals-corrosion protected LED indications: Green charging Green-Yellow-Red battery levels Red low voltage warning and disconnect Green-Yellow-Red battery levels All 3 LEDs blink-to show mistakes