الوصف
The manufacturer supplies wx****0 stainless steel mixing drum and
stainless steel mixer reaction kettle
Stainless steel agitators are widely used in coating, medicine,
building materials, chemical industry, pigment, resin, food,
scientific research and other industries. The equipment can be made
of carbon steel, stainless steel and other materials according to
the process requirements of users' products, and heating and
cooling devices can be set to meet different process and production
needs. The heating forms include jacketed electric heating and coil
heating. The equipment has the characteristics of reasonable
structure design, process, durability, simple operation and
convenient use. It is an ideal chemical equipment with low
investment, fast production and high income.
Type of agitator
â‘ The propeller agitator is composed of 2 ~ 3 propelling
propeller blades (Fig. 2). The working speed is high, and the
peripheral speed of the outer edge of the blade is generally 5 ~
*5m/s. The propeller agitator mainly causes axial liquid flow and
generates large circulation volume. It is suitable for mixing low
viscosity (< 2PA · s) liquids, emulsions and suspensions with
solid particle content less than *0%. The rotating shaft of the
agitator can also be inserted into the tank horizontally or
obliquely. At this time, the circulating circuit of the liquid flow
is asymmetric, which can increase turbulence and prevent the liquid
level depression.
â‘¡ The stainless steel mixing drum agitator is composed of 2 ~ 4
flat or curved blades installed on the horizontal disc (Fig. 3).
The ratio of the outer diameter, width and height of the blade is
generally *0:5:4, and the circumferential speed of the stainless
steel mixing drum is generally 3 ~ 8m/s. The highly turbulent
radial flow caused by the rotation of the turbine is suitable for
the dispersion of gas and immiscible liquid and the liquid-liquid
phase reaction process. The viscosity of the stirred liquid
generally does not exceed *5Pa · s.
â‘¢ There are two types of paddle agitators: flat paddle and
inclined paddle. The flat paddle agitator is composed of two flat
paddles. The ratio of blade diameter to height is 4 ~ *0, the
circumferential velocity is 1.5 ~ 3m/s, and the radial flow
velocity is small. The two blades of the inclined paddle agitator
(Fig. 4) turn *5 ° or *0 ° opposite to each other, resulting in
axial liquid flow. Paddle agitators are simple in structure and are
often used for mixing low viscosity liquids and dissolving and
suspending solid particles.
â‘£ The shape of the outer edge of the anchor agitator blade and
the inner wall of the mixing tank shall be * (Fig. 5), and there is
only a small gap between them, which can remove the viscous
reaction products attached to the tank wall or the solids
accumulated at the bottom of the tank, so as to maintain a good
heat transfer effect. The peripheral speed of the outer edge of the
blade is 0.5 ~ 1.5m/s, which can be used to stir Newtonian and
pseudoplastic fluids with viscosity up to **0Pa · s (see viscous
fluid flow. Only when stirring high viscosity liquids, there is a
large stagnant zone in the liquid layer.
⑤ The outer diameter and pitch of the ribbon of the ribbon
agitator are equal (Fig. 6). It is specially used to stir high
viscosity liquids (**0 ~ **0pa · s) and pseudoplastic fluids. It is
usually operated in laminar flow.
â‘¥ The magnetic stirrer Corning digital heater is equipped with a
closed-circuit knob to monitor and adjust the mixing speed. The
microprocessor automatically adjusts the motor power to adapt to
water quality, viscous solution and semi-solid solution.
⑦ The magnetic heating stirrer Corning digital heating stirrer
has an optional external temperature controller (cat. No. ***5pr),
which can also monitor and control the temperature in the
container.
Heating or cooling device
Generally, the user unit depends on whether the material is heated,
dried or cooled. Within the customized range, the temperature shall
be below **0 ℃ and the service pressure shall be lower than
0.1MPa. The heating method can be determined according to the
production conditions of the user. There are two heating methods:
hot oil and other media circulation and direct electric heating.
The circulation of hot oil and other media is that the heat
transfer oil is heated to a certain temperature in another
configured heating tank, and then transported and circulated
through the hot oil pump; Direct heating means that an electric
heating pipe is directly installed on the jacket to heat the heat
transfer oil to the required temperature (the temperature can be
adjusted according to the actual situation). Cooling circulation is
to use water to circulate inside and outside the jacket, so that
the material will not produce caking or viscosity at a certain
temperature. Coil can also be added for heating or cooling
according to user requirements.
بلد: |
China |
نموذج رقم: |
-
|
سعر فوب: |
10000 / (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
ä¸Â��� |
سعر الحد الأدنى للطلب: |
10000 |
الحد الأدني للطلب: |
1 Box |
تفاصيل التغليف: |
�箱 |
موعد التسليم: |
60天 |
القدرة على التوريد: |
1000 Box per Month |
نوع الدفع: |
- |
مجموعة المنتج : |
- |