الوصف

Our jaw Stone crusher is ideally suitable for primary and secondary crushing with low power consumption and easy maintenance. Every feature of jaw crusher has been carefully designed to provide superior quality and performance.This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

jaw crusherUsage and Maintenance 1) The jaw crusher can be put into operationally when it works normally without load. 2) The stuff should be fed steadily. 3) Temperature rise of bearing should not exceed *5, the max temperature should not exceed *0.Otherwise, stop the machine and examine at once. 4) Stop feeding before stopping the motor. Stop the motor only when all the stuff is discharged from the machine. 5) If the machine is blocked by the stuff, stop the motor at once. Start up the machine again when the blocked stuff is clean away. 6) Clean the bottom of toggle plate and keep the back of moving jaw clean. 7) The jaw plate can be reversed when one end is worn out. jaw crusherLubrication 1) Check the lubrication frequently to make sure the machine can work normally and extend the life time. 2) The lubrication used in the machine depends on the place and climate. Usually quicklime grease is used. 3) The lubricant grease added to the bearings should be ***0% of its capacity. Change the lubricating oil once every three months. Before changing the oil, wash the bearings carefully with clean pet rolor kerosene. The contacting part of toggle plate and toggle plate seat should be oiled before start-up.