Super Slim HID Xenon Ballast with AC or DC

Rate Voltage:

*2V

Input Voltage:

9V**6V

Cold Starting Current:

≤8.5A

Hot Starting Electricity:

less the 4.0A

Instant Ignition Voltage:

****0V~****0V

Maximum Starting Current

≤6.5A/*3.5A

Steady Current:

*2V 3.2A

Steady Time:

≤*0s

Output Power:

*5W,*0W,*5W±1W

Output Power:

reach *0% in cold starting in 2s, reach *0% in 4s, reach rating output power in 8s.

Output Power:

DC *5±*7V

Luminous flux:

***0LM****0LM± **0lumen (decided by color temperature, the higher the temperature, the lower the lumen)

Output Voltage frequency:

**0HZ

Expected Life-Span:

***0h for Bulbs; ***0h for Ballast

Open Circuit Protection:

automatic protection in 1s

Short Circuit Protection:

automatic protection in 1s

Operation Temperature:

**0 degree- ***5 degree

Radiated EMI :

reach S*5/*4/EC standard

1.Notice in operation:

(1).Please wait for the entire cool-down of the car light and engine for the sake of safety during installation.

(2).Please do not wash your car before the lamp has cooled down to ensure the lamp will not broke by a sudden cool.

(3).Please do not look straight at the lighting when the light is on.

(4).Please wait with patience when turn on or turn off the wiring harness controller, it may delay for a few seconds.

(5).Please do not use the light before the engine is on.

2.Solution of malfunctions:

(1).Lighting dispersion

A. Please check the installation position of the bulb. You can adjust the thickness of the lamp holder or adjust the position of the head lamp, insuring the point of the lighting is the same.

B. The effect of the lamp shell is not so perfect; you can change the new lamp shell.

(2).The flicker of the lamp

A. Please check the stabilization of the power supply.

B. Change the ballast to see whether it can work.

C. Change the bulb to see whether it can work.

(3).The failure of the lamp

A. Please check the installation of circuit

B. Check the power supply

C. Change to see whether there is any creepage of the power supply.

(4). The two head lamps are not lighting at the same time or just one lamp can be lighting

A. It is related to the car model

B. It is related to the bulb specialty.

C. It is related to the installation line.

D. You can try to replace the bulb and ballast, and sometimes the malfunction is not related to the product quality, but for the wrong installation or the bad connection.