الوصف
ALTOCAST
AND ALTOSPLINT
1) ALTOCAST
ALTOCAST™is composed of knitted fiberglass (or polyester)
fabric impregnated with a water activated polyurethane resin. The
setting time is approximately 4 minutes and it takes *0
minutes for full weight bearing. ALTOCAST has been introduced
whole world and it brought us good reputation as a valuable
products. It’s a substitution of “Plaster of Paris” or “ Plaster
Bandage”. ALTOCAST™ is intended for use in the construction of most
common orthopedic cast applications, as well as specialized
orthotics and prosthetics devices. Specific application suitability
should be the responsibility of a qualified, on-site medical
professional. Construct cast by wrapping rolls in a spiral manner,
overlapping previous layers by one half or two thirds the width of
the roll being used.
1. CONFORMABILITY AND MOULDABILITY
ï¬ ideal structure of Fiberglass knitted tape
ï¬ multi-directional stretch(length, cross and diagonal
way)
ï¬ bony prominences such as joints, elbows, ankles, heels,
etc.
2. RADIOLUCENCY
ï¬ Excellent X-ray translucency
ï¬ Fiberglass X-ray translucency
3. BETTER SANITATION
ï¬ Moisture resistance.
ï¬ Easy to dry
ï¬ Prevents bad odors, skin contagions or other
complications.
4. ECO
FRIENDLY
5. No-End Edge Problem
ï¬ ALTOCAST was designed considering physicians attitude.
ï¬ Save time and effort.
2) ALTOSPLINT
ALTOSPLINT™ is intended for
the emergency and temporary use in the immobilization of fractures,
joints, post-operation or strains and sprains. Specific application
suitability should be the responsibility of a qualified, on-site
medical professional. ALTOSPLINT™ is a synthetic orthopedic
product. Its outside pads are polyester non-woven fabric for
cushioning and the inside is non-woven or fiberglass or
polyester substrate impregnated with water-activated polyurethane
resin for weight bearing. Exposure to any moisture will cause the
tape to harden and become rigid. The setting time for this product
is approximately 4 minutes and may be *0 minutes after setting for
weight bearing.
1. NEAT
APPEARANCE
Side of ALTOSPLINT™ pad is sealed by ultrasonic wave to give neater
and smarter appearance than conventional sealing methods such as
sewing or gluing methods.
2. STRENGTH
ALTOSPLINT™ has superior strength than generally required for
SPLINTs.
3. MOULDUABILITY
ALTOSPLINT™ is very easy to shape the contours of the human
body,especially bony
prominences such as joints, elbows, ankles and heels.
4. Superb
X-ray permeability
ALTOSPLINT has superb X-ray permeability, which
allows taking X-ray with the splint.
5. VARIETY
OF SIZES
ALTOSPLINT™ provides 5 and 9 different sizes in Roll Type and One
Step Type respectively.ALTOSPLINT Roll type is economical since you
can cut the roll as long as you required.
ALTOSPLINT Pre-cut type is simple to use since
it has various lengths.
6. NO-NEEDLE
SPROUTING PROBLEM
When fiberglass was cutting, Some other
fiberglass wouldl be sprouted up and became painful needles.
However ALTOCHEM fiberglass has treated unique heat treatment, It
does not leave any of hazard
| بلد: |
South Korea |
| نموذج رقم: |
AC236HFC~AC536HFC
|
| سعر فوب: |
1.35 ~ 2.55 / Roll ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
Made in Korea |
| سعر الحد الأدنى للطلب: |
1.35 per Roll |
| الحد الأدني للطلب: |
2000 Roll |
| تفاصيل التغليف: |
Export standard package |
| موعد التسليم: |
Within 4 weeks after payment |
| القدرة على التوريد: |
3000 Roll per Day |
| نوع الدفع: |
L/C, T/T |
| مجموعة المنتج : |
Orthopedic Casting Tape
|
